All of a sudden my phone button doesnt do anything. No error messages received when pressing it

Though they put all the buttons in at production of he vehicle, this is an option that you have to have the bells that go with it to use it. These are add on options that you can acquire or purchase from your local Mini dealer.

its usually pretty straight forward. you need the garage clicker, and usually you need to hold down the receiver button in your car then press the garage door clicker and there should be an indication that it was stored. if this still doesnt help call caddy dealer im sure they can walk you through it over the phone.

I’m happy to assist further over the phone at https://www.6ya.com/expert/josh_8f8ad0a8f7e0e6d3

Unlikely, because anything associated with a phone button would not draw enough power to require a fuse. What is probably happening is either of three things. A loose wiring harness in the steering column, the actual switch has failed due to dirt or excessive use, or the circuit board that aggregates all of the switches from the steering wheel into a harness is cracked or has a bad solder joint.

According to the owners manual

TRAF (Traffic): Press this button to receive traffic announcements. The traffic announcement brackets will appear on the display. TRAF will appear on the display if the current station broadcasts traffic announcements. If the current station does not broadcast traffic announcements, the radio will seek to a station that does. When the radio finds a station that broadcasts traffic announcements, it will stop. If no station is found, NO TRAFFIC will appear on the display. When a traffic announcement comes on the current radio station or a related network station, you will hear it, even if the volume is muted or a compact disc is playing. If the compact disc player was being used, the compact disc will stay in the player and resume play at the point where it stopped. INFO (Information): If the current station has a message, INFO will appear on the display. Press this button to see the message. If the whole message does not appear on the display, parts of the message will appear every three seconds until the message is completed. To see the parts of the message faster than every three seconds, press this button again. A new group of words will appear on the display. Once the complete message has been displayed, INFO will disappear from the display until another new message is received. Hope this helps.

she had the key fob unlock button pressed down for more than 5 seconds...after it was locked....this is easily done. ..tell her to make sure she doesnt have the key in her purse or anything pressing the button.I have done this also years ago.Good luck

hi Andrew, try to press the pairing button and keeps hold for 3 sec. then switch the ignition in first position while still holding the button for another 3 sec then the the pairing messeage should be sig on. but it the pairing messeage did not show i suspect that your ULF control unit is faulty and needs to be replace.

jaguar parts dept can supply this very easy, contact the parts dept, they have manuals for what each car needs

No solution, same problem, but had many strange moments: 4 months ago during 100 kms or so it stopped, then suddenly came back, and worked ever since. A few days ago, it started happening again: NAV stuck, then radio dead, and gradually the rest disappeared. I did a Reset, and since that moment I see the intro-screen and then it goes black. Hitting the TEL button is somehow also a Reset...

Do the previous 2 posters have anything to report on this matter? It would be VERY welcome!

Thanks,
Jeff

This is the procedure for a reprogram of the remote's from the factory service manual, if it doesn't work then u may have a receiver issue.
Use this Procedure for Vehicles with
Driver Information Center Buttons

This information is in your Owners Manual in the
Drivers Information Center Section.

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until
PRESS TO RELEARN REMOTE KEY displays

3. Press the set/reset button until
REMOTE KEY LEARNING ACTIVE displays

4. Press and hold the lock and unlock buttons on the first keyless remote at the same
time for approximatley 15 seconds. A chime will sound indicating that the remote is
programmed.

5. To program additional remotes at this time repeat step 3.
This vehicle can have a maximum of eight remotes programmed.
6. To exit programming mode turn key off and remove key.
Test remote(s).


Use this Procedure for Vehicles without
Drivers Information Center Buttons

To access this display, the vehicle must be in Park (P) with key in the on position (as far
as you can go without cranking engine)

1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays.
2. Press and hold the trip odometer reset stem for three seconds.
The message REMOTE KEY LEARNING ACTIVE will display
3. Press and hold the lock and unlock buttons on the first keyless remote at the same
time for approximately 15 seconds. A chime will sound indicating that the remote is
programmed.
4. To program additional remotes at this time repeat step 3.
This vehicle can have a maximum of eight remotes programmed.
5. To exit programming mode turn key off and remove key.
Test remote(s).

the dvd on a 2004 chrysler pacifica doesnt start you can hear the sound but no picture. what could be the problem?