Question about 2000 Jeep Grand Cherokee

1 Answer

03 Jeep Liberty - Evap system small leak

Check engine code for Evap system small leak. I replaced some cracked hoses and gas cap. code came back. Had my mechanic smoke test the system. found no leaks. code came back. what else can i check or replace?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

How about the filler neck. just had to replace mine and now its fine

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Error codes p0442 and po445


Po442 is evap system leak
check intake and all vacuum hoses for leaks
check evap canister and purge valve
Po445 is evap canister purge valve short circuit
check wiring and connection

Apr 16, 2016 | 2002 Jeep Grand Cherokee Limited

3 Answers

I n my 04 Jeep Cherokee I replaced the bank1sensor1. But now I'm getting code P0442. That's an evap leak. Would my sensor i replaced with a Mopar sensor cause that to code?Did I buy the wrong sensor?


code p 0442 refers to the EVAP system--small leak detected or large leak detected === causes --hose connections , --intake leak---EVAP canister---EVAP purge valve ---mechanical fault ( cap loose or not fitted properly)hose connections ---EVAP pressure sensor
I cannot see any connection between what you did and the fault code---

Nov 13, 2015 | Jeep Cars & Trucks

1 Answer

Engine light on in 2005 jeep liberty, code p0456


Code 456 is a common code for a small leak in the evap system. The evap system is how the computer vents gas fumes from the gas tank.
The problem could be a faulty gas cap, the cap left off with the engine running, or something else.

Sep 05, 2014 | Cars & Trucks

1 Answer

2004 jeep grand cherokee code 442/455


OBD code P0442 Small EVAP leak detected you may need to check the EVAP canister under the vehicle and the purge valve as well check for cracks on the canister or the purge valve and check all the rubber hoses connected to them foe cracks or holes. If you find any damage parts replace them. P0455 which means a large EVAP leak is sometimes referred as the gas cap leak check your gas cap and secure it tight if you still have the code change the gas cap hope this helps after you find and fix the problems get the vehicle to a shop and they will use an OBD scan tool to clear the codes.

Feb 26, 2014 | Cars & Trucks

1 Answer

My 2005 Jeep Liberty Limited only has 84000 miles and the check engine light came on. What does this code mean? The gas cap doesnt seem like it get very tight.


Hi Katherine:
P0456 - Evaporative Emissions System - Small leak detected
The Powertrain Control Module (PCM) at different times performs various tests on the EVAP system. OBD II Enhanced EVAP systems are in place to keep fuel tank vapors from venting into the atmosphere, and instead purges them into the engine to be burned. Regular pressure tests are conducted by the PCM to monitor the sealed system for leaks. The PCM monitors the EVAP system pressure by watching the fuel tank pressure (FTP) sensor. When the sensor indicates a small leak in the EVAP system, this code is set.

Potential Symptoms: there will likely be no noticeable symptoms other than the Malfunction Indicator Lamp (MIL). This is because the EVAP system is a closed system and only controls fuel tank vapors, not engine management.

Causes: Usually this P0456 code is caused by an incorrect or faulty gas cap. Filling the fuel tank with the engine running could conceivable cause this code as well or if the cap wasn't properly tightened. Any of the following could also be the cause:
A small leak in any of the EVAP hoses or fuel tank hoses
A small leak in the purge valve or vent valve
The EVAP Canister may be leaking

Possible Solutions: first, using a scan tool activate the vent solenoid, sealing the system. Then monitor the fuel tank pressure (FTP) sensor. If the system is sealing properly, the number will stay consistent. If is isn't, the pressure sensor will show that as well. If the system slowly leaks, use a smoke machine and watch for smoke exiting the system at any EVAP component. Any where there is smoke exiting the system, that is the faulty component. Do not pressurize the EVAP system with air pressure. Doing so can damage the purge and vent solenoids in the system.

Hope this helps; also keep in mind that your feedback is important and I will appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Dec 21, 2011 | 2005 Jeep Liberty

1 Answer

Code, p0442 p0445


P0442 - Evaporative Emission Control System Leak Detected (small leak)

This indicates a fuel vapor leak in the EVAP control system. It means a very small leak has been detected. In fact, the leak can be from a hole as small as 0.04" in diameter. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.

Symptoms: You likely won't notice any drivability problems.

Causes: A code P0442 most likely means one or more of the following has happened:
* A loose or improperly affixed gas cap
* A non-conforming gas cap (i.e. not factory/original brand)
* A small leak/hole in a fuel vapor hose/tube
* Other small leak in EVAP system
* Faulty vent o-ring seal

Possible Solutions: with a P0442, the most common repair is to:
* Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back.
* Otherwise, replace the gas cap, or
* Inspect the EVAP system for cuts/holes in tubes/hoses



P0445 - Evaporative Emission Control System Purge Control Valve Circuit Shorted.
Possible Solutions: with a P0445, the most common repair is to:
* Bad or loss contact wires
* Check harnesses, replace it


Hope helps (remember to rate this).

Nov 05, 2010 | 1999 Jeep Cherokee

2 Answers

Location of sensor for troubleshooting po442 to cause check engine light to come on


P0442 OBD-II Trouble Code - Evaporative Emission Control System Leak Detected (small leak)

What does that mean?
This indicates a fuel vapor leak in the EVAP control system. It means a very small leak has been detected. In fact, the leak can be from a hole as small as 0.04" in diameter. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.


Symptoms
You likely won't notice any drivability problems.


Causes
A code P0442 most likely means one or more of the following has happened:
* A loose or improperly affixed gas cap
* A non-conforming gas cap (i.e. not factory/original brand)
* A small leak/hole in a fuel vapor hose/tube
* Other small leak in EVAP system
* Faulty vent o-ring seal


Possible Solutions
With a P0442, the most common repair is to:
* Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back.
* Otherwise, replace the gas cap, or
* Inspect the EVAP system for cuts/holes in tubes/hoses


46b629a.jpg

Fig. EVAP vent solenoid (2) on 3.1L, 3.4L, 3.5L & 3.8L, showing the connector (1) and vapor line (2)


510065b.jpg

Fig. EVAP canister purge solenoid location on 3.1L & 3.4L


a193655.jpg

Fig. EVAP purge solenoid valve (3) location on 3.5L




Hope this help, good luck.

May 11, 2010 | 2002 Buick Century

1 Answer

Engine code 0456 ( evaportive emission control system leak detected, very small leak ) installed a new OEM gas cap and reset the computer. Worked fine for 1 1/2 week and check engine code came back? Cleand...


It's a leak in your evap system. Causes: *Loose or missing fuel cap. *Evap canister broke, hose cracked or not connected. *Purge or vent solenoid defective *Vacuum leak at engine good luck

Mar 08, 2010 | 2003 Chrysler Town & Country

1 Answer

2003 Jeep Liberty


p0455 is evap control system no purge or large leak
p0442 is evap control system leak detected (small leak)

the cause for both could actually be a loose gas cap.

Dec 18, 2009 | 2002 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

792 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...