Question about 2007 Ford Five Hundred Limited Sedan

1 Answer

Need to get factory code to unlock doors.

Manual says sticker with code is on computer module. where is the computer

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

If its like my 2008 Expedition, you will have to get the dealer to retrieve the code from the vehicle's computer.

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Where is the computer module on the 2006 f350


Location of Keyless Code on Computer Module of Ford F250 Superduty ( 2009 )

Finding this code seems to be a common problem, so, here is a better answer to save you the time I spent locating the sticker on the computer module that shows the keyless entry code.

One owners from 2008 F150 XLT Superduty tell me and I suspect the location for a F150 would be very near same location as on a F250

The computer module is mounted high on the firewall approximately behind the a/c fan speed control knob. Here is how to find it / get to it:

1. Remove the large cover under the steering column that covers the fuse block. You'll need to reach in under the dash, with your left arm, to the right of the steering column and left of center to move stuff to get a clear view.

2. Open the storage pocket door on the lower edge of the dash (right of the steering column) and squeeze the back side of the storage pocket to allow the stops to pass to the front. This will allow the opening to be clear to see the computer module up in the dash. Shine your flash light through this opening.

3. Move the first piece of white insulation to the side to see the firewall. Look up through the pocket door, moving the wiring harnesses aside if necessary. You'll find a second white insulation wrapped snugly across the computer module. When you push the insulation up to see the flat surface, you see the 5 digit number printed up-side-down in black on a white sticker. This is your keyless entry code.

Instructions for Programming Keyless Entry Code (from the 2008 Owner's Manual)

KEYLESS ENTRY SYSTEM (IF EQUIPPED)
You can use the keyless entry keypad to lock or unlock the doors without using a key.

The keypad can be operated with the factory set 5-digit entry code; this code is located on the owner's wallet card in the glove box, is marked on the computer module, and is available from your authorized dealer. You can also create your own 5-digit personal entry code.

When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.

Programming a personal entry code
To create your own personal entry code:
1. Enter the factory set code. The driver door will unlock.

2. Within five seconds press the 1 • 2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.

4. The doors will lock then unlock to confirm that your personal keycode has been programmed into the module.

Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 02, 2012 | 2006 Ford F 350 Super Duty

1 Answer

2003ford explorer door locks unlock codes


The code is printed (I think on a sticker type material) on the face of the vehicles computer. 2002 through 2007 the computer is in the right panel behind the middle row window. It is below the seat belt mechanism. You have to pull out the top plastic panel off, then loosen the lower panel to be able to see the face of the computer module. The code is on a sticker on the face of the module.

Sep 22, 2011 | 2003 Ford Explorer

1 Answer

I bought a 99 expedition used... can i reset the keyless door entry pad?


I did a search and found this answer for you

Here is the location with full instructions:
The module is fastened to the top of the firewall directly behind the fuse box. It can be reached easily when you lie on your back in the driver floor area with your head close to the brake pedal. Just look up and you'll see it is clearly marked and the sticker also displays the factory-set access code for your truck.
Once you locate the module Make a note of the 5-digit access code on it.
Once you find the code, here is how to program it:

Now that you have the codes follow these steps to operate it completely. Remember from the driver's door, all operations must start with the 5 digit code first then follow it with the other options.
When pressing the controls on the keyless entry keypad, press the middle of the buttons to ensure a good activation.

IMPORTANT: Every step outlined in every procedure below must be done within five (5) seconds of the previous step.

REMEMBER THIS: If you try the factory code first and it doesn't work try to reset the keypad back to the factory code. Your personal code does not replace the factory-set code. So no matter what you can erase anyone's code back to the factory OEM setting. You can use either code to unlock your vehicle. Each time you set a new personal code the module will erase the previous one in favor of the new code.

Deprogramming (erasing) your own or pre-set personal code and leaving only the factory-set
1. Enter the factory-set code. (5 digit) from the sticker on the RAP module.
2. Press the 1/2 control.
3. Press the 7/8 and 9/0 controls at the same time.
The system will now only respond to the factory-set code.

Unlocking the driver's door (also disarms the perimeter alarm system)
1. Enter either the factory-set code or your new personal code. The interior lights will illuminate as soon as the first valid digit is pressed.

Unlocking all doors
1. Unlock the driver's door (5 digit code) then press the 3/4 control.

Locking the doors (also arms the perimeter alarm system)
1. Press 7/8 and 9/0 controls at the same time. The 5-digit code does not have to be entered.

Deactivating/Activating Auto lock
1. Enter the five (5) digit code.
2. Press and release the 3/4 control while holding the 7/8 control, then release 7/8.

Programming your own personal entry code
1. Enter the factory-set code (keypad will illuminate when first digit is pressed).
2. Press the 1/2 control.
3. Enter your personal 5-digit code.

Sep 12, 2011 | Ford Expedition Cars & Trucks

1 Answer

HOW TO FIND AND PROGRAM A KEYLESS ENTRY


Keyless Entry Keypad FAQ Ford Explorer
The keypad can be operated with the factory set 5-digit entry code
You can use the keyless entry keypad to
  • Lock or unlock the doors without using a key.
  • Open the liftgate window.
  • Activate or deactivate the autolock feature.

Where the code can be found
  • This code is located on the owner's wallet card in the glove box
  • Is available from your authorized dealer via scan code
  • Is marked on the computer module

Computer Module location
  • 1995 thru 2001 is located in the jack storage compartment in the rear of your Explorer. First remove the panel to the jack storage compartment. Towards the front of this area you should see a metal box this is your auto-lock module(way up front next to your rear left passenger seat). On the back side of this is your 5 digit code factory preset code. It is hard to get to. To see it you will have to loosen, pull, use a flashlight or a mirror but it can be done.

  • 2002 thru 2007 is in the right panel behind the middle row window. It is below the seat belt mechanism. You have to pull out the top plastic panel off, then loosen the lower panel to be able to see the face of the computer module. The code is on a sticker on the face of the module.

Programming a personal entry code The factory set code cannot be reprogrammed but you can create your own 5?digit personal entry code. When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.
Up to three personal entry codes may be programmed to the vehicle. To create your own personal entry code:

  • 1. Enter the factory set code.
  • 2. Within five seconds press the 1 ? 2 on the keypad.
  • 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.
  • 4. Press 1 ? 2, 3 ? 4 or 5 ? 6 to indicate which of the three personal entry code positions you wish to use.
  • 5. The doors will again lock then unlock to confirm that your personal key code has been programmed to the module.

Mar 18, 2011 | Ford Expedition Cars & Trucks

1 Answer

Need to find the computer module with the factory keyless entry code for a 2003 Mercury Grand Marque GS


the code is usually found on stickers on the trunk hinges. if not remove the drivers door panel, the code is on the module that is in the door. use that code to access all functions including setting your own code.

Sep 04, 2010 | 2003 Mercury Grand Marquis

1 Answer

Need to figure out how to unlock the door i can lock but dont have code to unlock


Where the code can be found
  • This code is located on the owner's wallet card in the glove box
  • Is available from your authorized dealer via scan code
  • Is marked on the computer module


Computer Module location
  • 1995 thru 2001 is located in the jack storage compartment in the rear of your Explorer. First remove the panel to the jack storage compartment. Towards the front of this area you should see a metal box this is your auto-lock module(way up front next to your rear left passenger seat). On the back side of this is your 5 digit code factory preset code. It is hard to get to. To see it you will have to loosen, pull, use a flashlight or a mirror but it can be done.

  • 2002 thru 2007 is in the right panel behind the middle row window. It is below the seat belt mechanism. You have to pull out the top plastic panel off, then loosen the lower panel to be able to see the face of the computer module. The code is on a sticker on the face of the module.
Hope this helped (remember comment and rated this).

Apr 25, 2010 | 1999 Ford Explorer

1 Answer

Reset Door Code 2010 F250


Location of Keyless Code on Computer Module of Ford F250 Superduty ( 2009 )

Finding this code seems to be a common problem, so, here is a better answer to save you the time I spent locating the sticker on the computer module that shows the keyless entry code.

One owners from 2008 F150 XLT Superduty tell me and I suspect the location for a F150 would be very near same location as on a F250

The computer module is mounted high on the firewall approximately behind the a/c fan speed control knob. Here is how to find it / get to it:

1. Remove the large cover under the steering column that covers the fuse block. You'll need to reach in under the dash, with your left arm, to the right of the steering column and left of center to move stuff to get a clear view.

2. Open the storage pocket door on the lower edge of the dash (right of the steering column) and squeeze the back side of the storage pocket to allow the stops to pass to the front. This will allow the opening to be clear to see the computer module up in the dash. Shine your flash light through this opening.

3. Move the first piece of white insulation to the side to see the firewall. Look up through the pocket door, moving the wiring harnesses aside if necessary. You'll find a second white insulation wrapped snugly across the computer module. When you push the insulation up to see the flat surface, you see the 5 digit number printed up-side-down in black on a white sticker. This is your keyless entry code.

Instructions for Programming Keyless Entry Code (from the 2008 Owner's Manual)

KEYLESS ENTRY SYSTEM (IF EQUIPPED)
You can use the keyless entry keypad to lock or unlock the doors without using a key.

The keypad can be operated with the factory set 5–digit entry code; this code is located on the owner’s wallet card in the glove box, is marked on the computer module, and is available from your authorized dealer. You can also create your own 5–digit personal entry code.

When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.

Programming a personal entry code
To create your own personal entry code:
1. Enter the factory set code. The driver door will unlock.

2. Within five seconds press the 1 • 2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.

4. The doors will lock then unlock to confirm that your personal keycode has been programmed into the module.

Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.


Good Luck (remember comment and rated this).

Apr 13, 2010 | 2008 Ford F-250 Super Duty

1 Answer

Remove or disable keyless entry code.


this code is located on a module on inside left rear panel where your car jack is located you will need a flashlight to look up on the module there will be a sticker on this module with 5 digits this will be the original factory code to lock or unlock your car . inside your owners manual there is a procedure to change the code .

Mar 19, 2010 | 1994 Ford Explorer Limited

1 Answer

Help with finding keyless door pad codes and resetting


Open the trunk and up under the package tray where rear speakers mount,on the passenger side you will see the module.It will be black and have 3 connectors to it.It will have a sticker on it with a 5 digit code.It will also have a sticker on one of the trunk hindges with this code if someone has not removed it.Here is how the system works:

Keyless Entry Keypad To unlock the driver front door (20124), and disarm the anti-theft alarm control (19A366) (if equipped):
  • Enter the permanent factory code.
  • Enter the owner's alternate code.
To unlock the passenger door(s), press the 3/4 button within five seconds of unlocking the driver front door or luggage compartment door (40110) . To unlock the luggage compartment door, press the 5/6 button within five seconds of unlocking the driver or passenger door(s). To turn on the interior lamps (13776) and light all illuminated components, lift either front door handle (22404) and press any button on the keyless entry keypad (14A626) . To lock all doors, press the 7/8 and 9/0 buttons at the same time. (It is not necessary to enter the key code first.) This will turn off courtesy lamps. To program a temporary code:
  • Enter permanent code.
  • Within five seconds of pressing last button of permanent code, press 1/2 button.
  • Enter any alternate five-digit code within five seconds of pressing 1/2 button.

Apr 15, 2009 | 1995 Ford Taurus

1 Answer

Find door entry code 2001 sport trac


The module is behind the left hand quarter trim panel. It will have a sticker on it with the 5 digit factory code.
You can also retrieve the number with a scan tool if you know somebody that has one. You have to have one that is able to look at PID data then access the RAP module.
Once you have the factory code you can program any 5 digit code you want by pressing the factory code then the no. 2 button then enter your 5 digit code. This code will remain unless battery goes dead in vehicle.

Feb 26, 2009 | 2001 Ford Explorer Sport Trac

Not finding what you are looking for?
2007 Ford Five Hundred Limited Sedan Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...