Question about 2005 Mazda 3

1 Answer

I have a 2005 Mazda 3 when a/c on and car stopped engine shutts

I have a 2005 Mazda 3 about a year ago i hit a big puddle actually stopped my car from moving i had the engine checked no problems no hydro locking what so ever. but since then when ever i happen to turn my a/c on it runs ok when im driving the car but when i come to a stop or in traffic with out constant moving the rpms seem to drop and car shutts off so i took it to Mazda and they told me it was my intake manifold so i replaced it but still have the problem does anyone know what could be wrong. thanks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mazda dealer needs to reprogram the minimum idle airflow.

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drove through puddle - Battery light came on, temperature gauge all the way up, cold air blowing out of vents


Sounds like it may have blown a hose and you lost all the coolant. IT could also be that the puddle you drove through caused the head gasket to blow. At any rate, this is not going to be cheap.

Feb 20, 2014 | Mazda 626 Cars & Trucks

1 Answer

Will a 4.0 engine out of a 2002 explorer work in a 2005 explorer with a 4.0


The short answer is maybe.
The actual long block part of the engine is used in 2002 - 2005 models, but there are 3 or 4 versions.
If you are wanting to swap out a complete engine from one year to the other, I doubt it. Most of the parts will probably work, but not all.
One big factor is wiring harness hookups.
The problem with swapping engines today compared to 25 yrs ago is now each year has to beat the fuel economy and emissions of the year before. So each year is a little different.

Sep 14, 2012 | Ford Explorer Cars & Trucks

1 Answer

2109 volswagen passat,was driving and after i hit a big bump it shutt off,,, is diesel engine,is there a shut off switch


if there is it would probably be located in the trunk space somewhere easily accessible

May 24, 2011 | 2010 Volkswagen Passat

1 Answer

2005 Mazda Tribute... Similar to a few unsolved issues. Burns excessive oil, ever since I got it. Every 1000km or so, 1/2 to 3/4 liter of oil. No leaks, emissions are okay. Also fuel economy is not...


Sounds like the Valve Guides are **** out oil is seeping down valve stems and burning in the cylinders. Some times STP oil treatment can slow the oil down because of its thickness. I have put about a cup of dexron2 transmission fluid in my oil to swell up the O-ring seal on the valve stem to stop this problem and a cup will not hurt anything. Like i have put STP in Automatic Transmissions to correct leaky valve body problem work like a charm.Can give you 3 to 5 more years of life to a transmission.

Feb 01, 2011 | 2005 Mazda Tribute

3 Answers

2005 mazda 3 2.3l that is burning oil (no leaks)


possibly the pcv but check if your cars exhaust smoke is blueish or white in color if it does and your car doesnt have an oil leak then sure its burning engine oil along with fuel, the piston rings is defective, since you replaced engine oil the additive that the owner has put with the oil to prevent blowby is gone thats why it starts burning oil.....

Apr 14, 2010 | 2005 Mazda 6

1 Answer

I have a Mazda 3 year 06', the engine light recently came on... I have the oil changed every 3k, since I bought the car 3 years ago. Recently, it has been making a shuttering noise coming from the engine....


Look's like you have kept up with your car, but if engine light came on you need to have engine diag. done to find out what's going on, it's on because engine computer pick up a bad signal from one of your sensor, have it check out.Good luck.

Dec 11, 2009 | 2006 Mazda 6

1 Answer

Hesitation during acceleration


could be the type of plug you are using.I was told only to use ngk plugs.I recently put bosch plugs in my mazda 3 and the check engine light came on and it started missfiring.

Apr 26, 2009 | 2004 Mazda 3

1 Answer

My Mazda 929 went through a water puddle and now it wont start


I agree with "emissionwiz". What probably happened was you hydrostatic-ally locked your engine. What happens is when you went through that puddle water got sucked into the intake and into the engine. Water being a liquid cannot be compressed and stalled the engine and most likely bent some internal components. If you can hear the starter click but the engine won't turn over you've got a 99% chance its a ruined engine. If you don't want to believe that try turning the engine over by hand (socket on crankshaft), you should be able to turn it, if not it's done for. Good luck and sorry about the misfortune but next time go very slow through puddles.

Apr 03, 2009 | 2004 Mazda 3

1 Answer

2002 crystler pt cruiser pulsing breaks


yes the rotors may only be 6 mo old, but it does not mean they didn't become warped in this little bit of time! try to think back if u had to slam on the brakes at some time to avoid some thing and hitting a big puddle of water and then hitting the brakes hard can warp them easily, i bet if u have them checked u will find they have become warped! ( could also be the quality of parts, it does happen) good luck to u,hope we helped.

Mar 03, 2009 | 1994 Cadillac Eldorado

Not finding what you are looking for?
2005 Mazda 3 Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...