Question about 2005 Nissan Altima

1 Answer

2005 altima hard to steer , no leaks found , fluid level ok ,belt ok when turning you need to pull back wheel with force .

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,341 Answers

It seems a problem with your power steering pump,have it checked.

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When idling my almera 55 plate, if you turn the steering it makes a whirring noise, both ways, is this belt or steering fluid levels, or what else, not to good on modern cars so not sure where to start....


I would start by checking the fluid. I would than turn my eyes to the pump its self. I would not think it was the belt because that would make sound on start up and the power steering would be stiff.

Apr 26, 2011 | 2005 Nissan Altima

3 Answers

Power steering pump replaced, start to work ok, after 10 milles driving, steering wheel is hard, like pump is not working, under hood everything look ok.


YOU HAVE AIR IN THE POWER STEERING SYSTEM.YOU NEED TO BLEED POWER STEERING PUMP FIRST BEFORE DRIVING VECHICLE.CHECK POWER STEERING FLUID LEVEL ADD MORE POWER STEERING UNTIL REACH FULL COLD MARK..RAISE VECHICLE FRONT WHEELS OFF THE GROUND.START ENGINE LET IT IDLE WHILE TURNING STEERING WHEEL LEFT TO RIGHT NON STOP DONT LOCK OR STOP STEERING WHEEL KEEP TURNING IT SEVERAL TIMES CHECK POWER STEERING FLUID IF LOW ADD UNTIL YOU GET COLD MARK ON DIP STICK DONT OVER FILL POWER STEERING PUMP BLOW A SEAL.IF POWER STEERING FLUID LOOK TAN COLOR SYSTEM FULL OF AIR.TURN OFF IGNITION LET CAR SET FOR A WHILE CHECK FLUID LEVEL.IF STEERING WHEEL FEEL STIFF HARD TURNING DONT DRIVE CAR UNTIL YOU HAVE NORMAL STEERING.IF STILL HAVE AIR IN SYSTEM BLEED SYSTEM UNTIL AIR IS OUT.

Feb 25, 2011 | 2002 Chevrolet Avalanche

1 Answer

After I replaced the power steering pump and reservoir on my 2002 Jeep, I still get air in the system. Where could it be coming from?


Your problem could be a pressure side hose that has a rupture that only leaks in extreme conditions. Inspect to replace with new to repair problem. First make sure you have removed the pump caps off of the hose fittings. If ok, it appears you may have a stuck valve in the rack assembly. Replacing the rack should solve your problem. ------- The new pump should be self-bleeding by turning the wheels left and right. Let sit over night to release air bubbles, recheck fluid level.------ Check the tension of the drive belts on the pump, as they may be loose. The power steering pump and reservoir is located on the front of the engine driven by one of the fan belts. There is a removable cap on the top with a dipstick attached. With the engine off, fill this up to the full mark with power steering fluid. Replace the cap, start the engine and check for leaks. On the back of the pump are two hoses either one could be leaking. REPAIR PROCEDURE:
1. Wipe the power steering cap and area free of dirt. Remove the power steering cap.

2. Use a siphon pump to remove as much fluid as possible from the power steering fluid reservoir.

3. With a helper in the vehicle, raise the vehicle on an appropriate hoist.

WARNING :POWER STEERING FLUID, ENGINE PARTS, AND THE EXHAUST SYSTEM MAY BE EXTREMELY HOT IF THE ENGINE HAS BEEN RUNNING. DO NOT START ENGINE WITH ANY LOOSE OR DISCONNECTED HOSES. DO NOT ALLOW HOSES OR POWER STEERING FLUID TO TOUCH HOT EXHAUST MANI FOLD OR CATALYST.
4. Locate the power steering cooler attached to the crossmember support plate. Slide back the clamp and disconnect one of the two power steering return hoses at the power steering oil cooler and drain fluid in an appropriate container.
5. Have the helper turn the steering wheel back and forth quickly several times to force as much fluid as possible from the steering gear.
6. Reconnect the hose at the oil cooler using the original clamp.
7. Lower vehicle so the vehicle tires are not contacting the ground.
9. For proper fluid fill and bleeding air from the power steering system:

a. Fill the power steering reservoir to the top of the fill range using Mopar power steering fluid (ATF+4) p/n 05013458AA.

b. With the engine OFF and the vehicles tires off the ground, slowly turn the steering wheel back and forth (lock to lock) slowly 20 times to force fluid into the steering gear.

c. Fill the power steering reservoir to the top of the fill range.

d. Start engine and let run for a few seconds, then turn oft engine.

e. Check fluid level and add if necessary.

f. Start engine, and slowly turn the steering wheel lightly contacting the left and right stops.

g. Stop the engine and check fluid level. Add fluid if necessary.

h. Lower vehicle, start engine and slowly turn steering wheel lock-to-lock.

I. Stop engine and check fluid level. Add fluid if necessary.

j. If fluid is extremely foamy, allow vehicle to stabilize a few minutes, then repeat steps "i" and "j" until the fluid level remains constant after running the engine and turning the steering wheel from lock to lock.

10. Inform the vehicle owner/operator that a steering vibration may be noted for a few hundred miles until the air is completely removed from the steering system.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Jan 26, 2010 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Steering wheel is hard to turn right. Have to be


I would check the power steering fluid level first and if its down repair the leak and recheck to see if its cured if there is no leaks and the level is fine ..Remove the serpintine belt and see if the pwr steering pump pulley pulls off. I have seen the pump shafts break and appear to be fine but they will pull out of the pumps...Good luck hope this helps..

Jan 24, 2010 | 1991 Oldsmobile Ninety Eight Regency

2 Answers

Its hard to steer the vehicle when going slow when moving at faster speeds the vehicle will turn with ease, backing in or out of a parking space is very difficult and I sprang my wrist trying to steer the...


Check the operation of the power steering system.
Check the power steer drive pump belt is ok,
Check fluid level of Pwr steer pump is ok.
No oil leaks should be evident on the power steer system.

Jul 09, 2009 | 1997 Chevrolet Malibu

1 Answer

Power steering


Sounds like a bad steering rack & pinion assembly... is it only bad in one direction or both...?
If both then it's the rack assembly... Hope this helps...;-)

Apr 13, 2009 | 2005 Nissan Altima

2 Answers

2005 jetta no power steering hard to steer


First and foremost, (if not already done) check the powersteering resevoir to make sure it has fluid and it is full as well as having no leaks. If it's leaking you may see small dark areas where you frequently park, on the ground. If it is full, there is a chance you need a new one, a hose/line is broken or has a hole (leak). A mechanic is your best choice to find this out. If the resevoir is empty or low, (can be checked hot or cold; look for level indicators for each on dipstick); fill it up and drive for a day or two - check the fluid again (make note of any difference in steering after filling. Powersteering pump may also be belt driven, so make sure the belt is tight (no cracks, etc.) may need to replace belt.

Mar 31, 2009 | 2005 Volkswagen Jetta

1 Answer

Stiff steering


Check fluid and make sure it filled enough,(make sure that its actually power steering fluid in there and not something else added by mistake for ex. antifreeze etc) make sure there are no leaks. Check power steering belt and and make sure its tight NOT loose or slipping. From personal experience with these vehicle you MOST likely cause of this problem if all the items above are GOOD is a bad power steering pump.

Jan 28, 2009 | 2005 Nissan Altima

1 Answer

Car started making noise and the wheel became hard to turn


Is the belt on the power steering pump tight or loose does the pump makes a huming noise when turning steering all these are causes of hard to turn steering belt need to be (tight) on pump and pump must not be huming when turning steering add fluid if needed and play with steering to see if help if not need to replace pump

Nov 12, 2008 | 2003 BMW 325

Not finding what you are looking for?
2005 Nissan Altima Logo

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...