Turn your key to accessory until you see code on the unit. You simply push the radio station selection buttons, there should be 6 buttons. After you push the last button it should automatically come back on.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
put a battery charger on the battery,turn key to on postion[engine not running] turn radio to on and let it sit there like that for about 5 hours or untill radio say code then enter right code. if battery goes dead during this you have to dtart over
If you have tried a few times before NOT entering the right code or making error when entering code. This radio will lock you out, here is what you do disconnect battery cable for 60 seconds (positive cable) or disconnect radio fuse. Then re-enter code make sure that you are pressing firmly on number and make sure that you enter correctly.(POWER ON RADIO SHOULD BE IN ON POSITION WHEN DOING THIS) If this doesn't work then you will need to go to HOnda and fora fee they will be able to get code. Good Luck and thanks for using FIX YA.
Your radio is now in "off" mode. To get it back to "code" mode you need to have power to the radio for 2 hours. This can be accomplished by either driving the car for 2 hours, or putting the key into position 1 on the ignition, but make sure to turn off the fan as it will drain the battery in 2 hours. Once you have "code" back you can enter the 4 digit radio code. Caution, many of these radios have been replaced so the code that the dealer gives you may be wrong. If entered and it comes back "EEEEEE" that means it is the wrong code. The radio must be pulled and get the factory serial number from the top of the unit.
Hi If the person before it had another stereo in the car or tok off the positive terminal without backup power to the ground and positive, and then they either put back the original radio or forgot about the anti theft system in radios now it can give you error, GM says to enter the unlock code "LOCKED" EVEN IF YOU know the number the radio has to be restored by the dealer, they have the code for your car to unlock the radio, the car dealer would need to take a look at the radio and will not tell you the master key code, as if they do that you can pass on the info and others can use it for illegal purposes. HTH Zues.
to enter your code when the cd player displays error leave cd player switched on and after 20 mins or so i will display 0000 then you will be able to enter your code this happens when some 1 has entered the wrong code