Question about 2001 Dodge Intrepid

1 Answer

2005 town & country reading light

How do I get the front reading lamp cover off to replace the bulb? This is located on the inside roof in the center above the rear view mirror. It contains the reading lamps and the digital display for the temp/mpg/fuel distance.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

I have the same vehicle... I will go out when the sun comes up and find out for you. I think it will let me post again to this question

Posted on Jun 17, 2009

  • Michael Fenton Jun 17, 2009

    ok I just looked at it. it is simple.

    the lens pivots and presses a switch in on one end to make the light come on. take a butter knife or very small screw driver and reach in between the lens and the black center console. there you will CAREFULLY press a flat tab to the side that is made onto the lens ( I hope you dont break this tab).

    on the very opposite position on the clear lens towards the door is where the lens has a tab that has a small hole in it. there is a plastic pin made onto the console trim that fits into this hole so the lens will pivot. this will give you an idea of which direction to pull the lens when you press in the tab,. it does look like it would break easily. I havent had to take mine off yet thankfully.

    please visit again and rank this answer if this helps!... good luck

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Town and counrty front right signal light flashing faster, rear light stop flashing


the signal indicator lights are suppose to flash in perticular time interval which is connected to a timer relay when the light flashes faster that means the other light is not working and the relay is getting double the current and moving faster so check the other light either the bulb is fuse or the current is not reaching up to the bulb

Aug 22, 2012 | 2005 Chrysler Town & Country

1 Answer

How hard is it to change a fog light bulb on a 2005 Subaru Forester? Can anyone do it?


Front Fog Light Assembly

REMOVAL


  1. Disconnect the ground cable from battery.
105919447



  1. Remove the two clips and lower mudguard on side that bulb is being changed.
  2. Disconnect the harness connector from bulb on back of fog lamp.
105919448




Front Fog Light Bulb

REMOVAL


1. Locate back cover on fog lamp assembly where bulb is located inside.

105919462



  1. Remove the back cover.
105919463



  1. Remove the spring retainer, and then detach the fog light bulb.
  2. DO NOT TOUCH HALOGEN BULB!! Oils from skin will cause bulb to explode during operation.

Jul 27, 2011 | Subaru Forester Cars & Trucks

1 Answer

Can u tell me where the fuse location for the center consolt lights on a chrysler voyager


In the U.S. the Chrysler Voyager was discontinued in 2003, but in Mexico and other parts of the world continues to market in 2004, the Chrysler Voyager was integrated to the line Town and Country, so the manuals are only available in the Town and Country.

The Heated Mirrors, Lower Instrument Panel Power Outlet and Removable Floor Console, when in the front position are fused with self resetting fuses that are only serviceable by an authorized dealer. The power seats are fused by a 30 Amp circuit breaker located under the driver's seat. The PowerWindows are fused by a 25 Amp circuit breaker located under the instrument panel near the steering column. Check there and look the label in the inside cover,
just remove the black filler panel.

Additional details cpuld find in the Owners Manual. Hope this helps.

Jan 27, 2011 | 2005 Chrysler Town & Country

1 Answer

Chrysler T&C (2005) - Can anyone describe how to access, remove, and replace the bulb in the crescent-shaped reading lights at the front of the overhead console. The owner's manual says nothing, and...


Start at the front towards the winshield with a very small flat headed screwdriver. Getting under the lip of the light cover in the front pop the 2 front clip down in the front. Do Not do this on the seat side or you brake the clip that turn the light on/off. After poping the front down, side out towards winshield. The blub removes by turning counterclockwise. Blub is a 578

Feb 07, 2010 | 2005 Chrysler Town & Country

1 Answer

How can I replace a bulb in the interior map reading light (courtesy light)? It does not give instructions in manual.


usually you just pop off the cover and replace the bulb. the covers just snap in place. unless there are screws witch you just unscrew.

Jun 22, 2009 | 2005 Chrysler Town & Country

1 Answer

2005 town & country reading light


I have the same vehicle. when the sun comes up I will go out and look my self and get back. It should let me post a follow up.

Jun 17, 2009 | 2005 Chrysler Town & Country

1 Answer

Town & Country reading light bulbs power rating


The lamp holders in my 2002 Dodge Grand Caravan are brown. The correct lamp is a PC579.

Apr 09, 2009 | Chrysler Town and Country Cars & Trucks

1 Answer

2007 chrysler town and country interior dome lights


if it is covered by a white plastic then inspect it carefully and look for slots where you can put tiny screwdrivers to pry the plastics off, then you can replace your bulb. just be careful not to break the plastic.

tnx 4 using fixya,

drcool

Sep 14, 2008 | 2007 Chrysler Town & Country LX New Cars

Not finding what you are looking for?
2001 Dodge Intrepid Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...