bought wires still missing truck ran fine on old plugs with 159000 miles on them in a 2000 chevy 2500 5.7 should i put my old plugs back in even though i broke on can i mix in an alternate plug whats going on
Is the check engine light on? Have it scanned. Autozone will do it for free. This will tell you which cylinder is the problem. One of the new plugs is likely cracked.
when on motion after about few kilometer the movement of d vehicle is not smooth then when the gear...
(More)
when on motion after about few kilometer the movement of d vehicle is not smooth then when the gear change it usually make a solid noise as if two iron hit each other.Also want to know the appriopriate place to change the automatic gear oil. In the derch board where u have the all the mitters, there is a place written FUEL DOOR pls what is the meanning. I also notice the vehicle consume excess fuel And the expert here could not solve the problem. Can i also get the mannual
Hi, I had a similar problem and ended up having to rebuild. I changed the fluid first (which is a...
(More)
Hi, I had a similar problem and ended up having to rebuild. I changed the fluid first (which is a true chore) and after that the hesitation was still there, when I had the trans pressures checked the flares were in the low/reverse and the 2nd gear mostly with a small flare beginning in third. I recommend having it pressure checked to see what the problem really is. Some shops do that for free. Hope this helps.
the reason i ask because i have seen the solenoids and the valve body but didn't want to pull down...
(More)
the reason i ask because i have seen the solenoids and the valve body but didn't want to pull down if i was going to mess up something else by doing so.