1998 Plymouth Grand Voyager Logo
Posted on Jun 17, 2009

1998 plymouth engine fuse burns

I was driving and the ban started shaking and then stop.... it did that once i wait a few hours and replace the engine fuse and it work againg for a few months and now did the same thing, but know it keeps burning the engine fuse and it wont start!!

any ideas??

thanks for the help

Paul

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 14 Answers
  • Posted on Jun 17, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Jun 12, 2009
Answers
14
Questions
0
Helped
6270
Points
50

First place i would start looking is the wiring to the O2 Sensors for shorts to ground or
in case the O2 Sensor itself is shorted, try disconnecting the sensors to see if the fuse stops blowing.
this is just a place to start, there are other problems that will blow that fuse. good luck.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

98 voyager with 3.0 stalls for no apparent reason, but will start after a few minutes

Any misfiring while its running? Codes? I did have a dodge once that did this and sometimes wouldnt start back up for an hour or so. After throwing lots of $$$ at it turns out map sensor. Good luck.
0helpful
1answer

My '98 Plymouth Grand Voyager starts with Low Pressure Light problms a few days ago. In the morning, when I start the engine, everything goes OK. A few miles later, in idle position or when the RPM go...

Check oil level. Make sure you're using the right weight oil. If those are good, you've either got a bad oil pressure sensor or pressure problems with the pump or worn engine bearings. Could be a sitcking pressure relief valve in the pump. But also could be a worn engine
0helpful
1answer

My wind shield wiper will not work checked the fuse ..its o k

COULD BE TWO THINGS...WIPER MOTOR FUSE,WHICH YOU CAN CHECK AND REPLACE,,OTHER WIPER MOTOR ITSELF,,WORKED OUT,BURNED OUT,,.EITHER CHECK IF POWER IS GOING TO IT,BY STRIPPING PANEL HIDING WIPER MOTOR AND RODS,CAN DO IT YOURSELF,IF YOU HAVE A BIT OF KNOW HOW.OR GARAGE TELL YOU IN ONE HOUR
2helpful
1answer

Van wont start, loud, has a burning smell and the oil light is on

I'd feel best if you can find a reputable mec and have it looked at. There are a mess of things that can make loud noise. You could have anything from a bad berring to a blown engine. When your'e on the road remember go to someone who is reccomended or a national chain or dealer..
0helpful
2answers

Chrysler cirrus 1998 stops while driving on highway

Fuel pump and filter were changed how long ago, and how many miles ago? Did they change the wrong thing(s)? What engine is in your Cirrus?
0helpful
1answer

I'm trying to replace the tensioner on a 1998 plymoth Grand caravan. I cant get the old tensioner out.

You have to get under the vehicle. Get yourself two 9" 3/8" ratched extensions, a ratchet and I think, a 15mm socket. I forget now, but it's around there somewhere. YOu have to position your face more to the right side of the engine and put your right arm up and over the axel assembly. Shine a bright light down into the engine and shine one from underneath. You might burn yourself, I know I did. The light has to be put right where your face is, otherwise, the engine components will get in the way. It's one single bolt, once you get it out, you'll go to work pretty easy. It took me a few tries. I solved the issue in about an hour.
0helpful
1answer

Turn signal problems on 98 Grand Voyager

Replace the turn signal relay. (daylight running lights and turn signal in one unit) It costs about 50 dollars.
Not finding what you are looking for?

141 views

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...