You can do anything for a price. if your handy find one at scrapers and install yourself is the best way.
SOURCE: 2007 hyundai santa fe
There is a sensor under the seat cushion that is basically a weight sensor, if a certain weight is not sensed then the airbag is turned off, it must be defective.
SOURCE: passenger seat heater not working in my 2003 volkswagen jetta
There are different fuses. check your fuses properly.
rate this fixya
SOURCE: driver's airbag light on 2007 PT Cruiser convertable
The first code is for "driver seat track position sensor low". The module detects that the sensor input is less than or equal to 0.3 mA. The second code is referring to the first code. I have no idea what the third code is. Basically you have two different communication systems mixed. The 2001 uses the PCI bus system and the 2007 uses the CAN bus which is much faster. The first code is a CAN bus code and the second is a PCI code. As far as the airbag deploying in the event of a collision, I don't believe it will with an active code in the system. I hope this helps.
SOURCE: 1993 Ford F150 4X4 Power door locks, power
CK FOR POWER TO LOCK @ WINDOW SWITCH IT COMES FOR MASTER WINDOW SWITCH ON LEFT SIDE DOOR NOT SHORE ON LUMBAR CONN.UNDER SEAT CK IT FOR POWER
SOURCE: Heated seat
It is the heatling element, stock elements have a single wire snaked through the element and when the circuit breaks it is done, aftermarket elements have a wired grid that if one area fails it still works, they also spread a more even heat.
54 views
Usually answered in minutes!
×