Need to remove and replace
SOURCE: where is mazda 929 ecu located?
If you mean Engine Control Computer, look up behind glove box on passenger side.
SOURCE: Replacing Ball Joints on 2001 Mazda B2500 (upper and lower)
its easier to get the whole control arm and the lower one has to be pressed in. it is not and easy job if you dont have the right tools checkout rockauto.com to look at the replacement parts and to get a price on them
SOURCE: 98 mazda b2500-my turning signal/hazard lights no longer work
You need to replace the flasher module, this is the module that controls the "Blinking" function of the lights, its a mostly a common part that you can get at any auto parts store for less than 10 bucks and is located in the Fuse panel under the dash, its round in shape in one corner of the panel. mostly they are green in color.
SOURCE: Can't locate the thermostat on my 1998 Mazda B2500
Buy a Hayne's Repair Manual. It's a life-saver. Otherwise, go to AutoZone and ask. Either they'll print out a photo for you or they'll just come out and show you. Good Luck.
SOURCE: Half the dash lights are out on my mazda b2500
There are several small screws to remove. It doesn't take long once you've done it and know where they are located. First you must remove the center console--there are two screws (i think 7mm or 8mm) underneath the middle part kind of hidden from view on the center console. Then remove the lower plastic panel under the steering wheel. Then a metal panel must be at least loosened enough to reach the lower screws on the dash panel you're trying to get at. Then there are three more screws along the top ledge that must be removed. Then you can get to the bulbs. I think there are 5 in there, and two in the center console. It sounds difficult and time consuming, but it only took me like 15 minutes start to finish
1,039 views
Usually answered in minutes!
×