The lights started to blink off and on, and at last refuse to come or work
Check fuse to it first.
if you have 12vdc to the center , then the center is bad, or its connections. (wiggle them. and see if things change, it must not)
SOURCE: 1996 Jeep Grand Cherokee wiper arm
The little blade lock will lift up. see image..."http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/0a/9d/4c//medium/0900c152800a9d4c.gif"
SOURCE: The interior lights for my 1996 jeep grand Cherokee Laredo
Hello and welcome to FixYa
The interior lights wont turn off cant because it can't get a conncetion definitely a headlight switch issue common problem for that make
Part # 05137535AA Headlight Switch Probably a dealer item very simple to change this yourself. Hope this gets you going.Please Rate Me. And you can always Ask Me.
SOURCE: 1996 Jeep Grand Cherokee Laredo - message center
This is a problem I have been
seeing more and more of lately. The brake light circuit goes through
the Lamp Outage Module (LOM). When the LOM senses a inoperative lamp,
the Vehicle Information Center (VIC) displays the data to the vehicle
operator.
Here is how to test the system (clic for zoom):
Check here for more details about the location of Lamp Outage Module (page 16).
Hope helps (remember rated this help) Good luck.
SOURCE: information center not working on 1997 jeep grand
The information center located on the overhead console gathers information from several sources. If some of those sources are not providing info then the display won't show it. When you say it is not working you need to see first if it is lit or not, or is it that some data (not all) is not showing?
155 views
Usually answered in minutes!
×