Question about Chevrolet TrailBlazer EXT

1 Answer

2005 Trailblazer, low beems would work sometimes and othertimes not. High beems always works. Now low beems will not work at all. Bulbs and fuses are ok.

Posted by on

  • F-family Jun 16, 2009

    I tried moving the wires around already. I will check again and look for the relay thanks

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,187 Answers

This issues are symptoms of loose connections on the end where your bulb is connected. You may want to switch the headlight on, pop the hood and try to move the terminals at the back of the headlight and see if it turns on. IIf it goes on it may be the terminals at the end of the headlamp. Otherwise it could be the wiring or the switch in the steering wheel. The headlamps also have relays normally located inside the hood in a plastic box. It might be loose. It is like a switch that makes you change from low to high. It may not be working correctly.

Posted on Jun 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 monte carlo drl won't tun on and i have no Low beams too. High beams, turning signals and hazards works. I replaced the bulbs, still drl and low bemas don't work. Checked all fuses and th


CHECK UNDER HOOD FUSE BLOCK FOR FUSES AND CIRCUIT BREAKER AND RELAYS....IF NOT IT IS AN ELECTRICAL DIAGNOSES. USE A MULTI METER TO SEE IF YOU ARE GETTING CLOSE TO 12 VOLTS AT SOURCE!
***NO EASY FIX...ALMOST EVER!!!

Jul 30, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

The headlight on the pass. side works right. the drivers side when in low beem, the light is in high beem. when the light is on high beem the light is on low beem. this is a 2000 mercury sable


someone has switched the wiring harness sockets to the wrong bulbs or installed the bulbs in reverse. get in behind the headlight assembly on the driver side and reverse the wires, if that does not work then pull the bulbs and swap them inside to outside and vice versa.

Jun 10, 2011 | Mercury Sable Cars & Trucks

1 Answer

I have no low beam headlights. The high beams work and I have changed the switch and bulbs and checked the fuses. what next


Check the connectors that go to the headlight bulbs to see if they are burned or melted. Low beam lights are on longer than high beams. The heat buildup around the connectors normally melts them.

Sep 27, 2010 | 2005 Chevrolet Trailblazer Ext

3 Answers

Low Beems are out. I changed both bulbs and the


DIMMER SWITCH OUT OF ADJUSTMENT.I SEEN CAR WITH SAME PROBLEM THEIR HIGH BEAMS WOULDNT WORK.THE DIMMER SWITCH AND BULBS WAS GOOD.IT TURNED OUT TO BE DIMMER SWITCH NEED TO ADJUSTED.

Mar 21, 2010 | 2005 Chevrolet Monte Carlo

3 Answers

2005 chevy trailblazer why would low beams work but not high beams


Faulty high/low beam switch. Pretty common on GM cars/trucks... Switch is about $125 plus labor. CHECK YOUR FUSES first. See owner's manual for location(s)....

Dec 01, 2009 | 2006 Chevrolet Trailblazer Ext

2 Answers

I only have high beems, I have replaced the bulbs and checked the fuses


check light switch,contacts brun out due to heat,we alway use low beams, that y high beam still work,they dont get used as often,and contacts melt,well good luck.

Oct 06, 2009 | 1998 Jeep Grand Cherokee

1 Answer

2005 Trailblazer, Low beems will not work high beems do


Pull plastic cover off of column ck where wires mate to multi function switch and switch for traces of heat . More than likely switch is bad.

Jun 16, 2009 | 2005 Chevrolet Trailblazer Ext

2 Answers

Fuse is fine hazards work but turn signals do not. all new bulbs.


your flasher is probably bad, it is usely round and mounted close to the fuse box

May 02, 2009 | 1988 Chevrolet Beretta

1 Answer

2005 dodge caravan low beams do not work


Hi my name is Allen!

The most probable cause is the multifunction switch. But I would try replacing one of the bulbs first to see if your low beems on the headlights or both bad. I have seen this several times. If the bulbs are OK the most likely fix would be the switch.

For further asistance you may reach me at FixYa!

Dec 25, 2008 | 1996 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...