Question about 1997 Honda Civic

1 Answer

My driver side turn indicator is flashing rapidly when engaged. The passenger side is still flashing correctly. Both front and rear driver side turn lights are flashing ( although very fast). Is this a bulb issue? How do I repair it? Thank you in advance for your help

Posted by on

  • jeffrey_marx Jun 16, 2009

    Thanks
    How hard is this to fix? Can I do it myself or do I need to take it to a service center?


×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 326 Answers

Its not the the bulb the problem the problem with the relay circuit in the car

Posted on Jun 16, 2009

  • SABARI ANAND
    SABARI ANAND Jun 16, 2009

    its not the the bulb problem.the problem is with the relay circuit in the car




×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My front wheel sensor shows low tire pressure, but it is fine. Is there a reset for that?


If its reading low and the tire pressure is correct there is a problem with that sensor. Typically they need to be replaced in order to correct the problem. A TPMS tool capable of displaying TPMS sensor data would confirm the bad reading.

They display the tire pressure as a convenience. They don't have to display the pressures and many makes/models do not.

The level of sophistication with these systems is slowly improving. Many newer models will automatically know where the tire is and display it correctly. Unfortunately yours need to be relearned manually after every tire rotation which is very common with earlier systems. It is assumed that this is done after every tire rotation which would then make the displayed tire locations correct.

If you are confident that the correct tire location is being displayed than I wouldn't see any issue with replacing that sensor. If you are not confident the correct tire location is being displayed than it wouldn't be a bad idea to do a relearn procedure.

The TPMS matching process is outlined below:
1. Set the parking brake.
2. Turn the ignition switch to ON/RUN with the
engine off.
3. Press and hold the Remote Keyless Entry (RKE)
transmitter's LOCK and UNLOCK buttons, at the
same time, for about five seconds to start the TPMS
learn mode. The horn sounds twice indicating the
TPMS receiver is ready and in learn mode.
4. Start with the driver side front tire. The driver side
front turn signal also comes on to indicate that
corner's sensor is ready to be learned.
5. Remove the valve cap from the tire's valve
stem. Activate the TPMS sensor by increasing
or decreasing the tire's air pressure for about
eight seconds. The horn chirp, can take up to
30 seconds to sound. It chirps one time and then
all the turn signals flash one time to confirm the
sensor identification code has been matched to
the tire/wheel position.
6. The passenger side front turn signal comes on to
indicate that corner sensor is ready to be learned.
Proceed to the passenger side front tire and
repeat the procedure in Step 5.
7. The passenger side rear turn signal comes on to
indicate that corner sensor is ready to be learned.
Proceed to the passenger side rear tire and
repeat the procedure in Step 5.
8. The driver side rear turn signal comes on to
indicate that corner sensor is ready to be learned.
Proceed to the driver side rear tire, and repeat
the procedure in Step 5.
9. After hearing the single horn chirp for the driver
side rear tire, two additional horn chirps sound
to indicate the tire learning process is done.
Turn the ignition switch to LOCK/OFF.
If no tires are learned after entering the TPMS learn
mode, or if communication with the receiver stops, or
if the time limit has expired, turn the ignition switch to
LOCK/OFF and start over beginning with Step 2.
10. Set all four tires to the recommended air pressure
level as indicated on the Tire and Loading
Information label.
11. Put the valve caps back on the valve stems.

This info can also be found on page 5-66 of your owners manual.

Feb 11, 2011 | 2008 Chevrolet Malibu

1 Answer

Driver front turn signal does not blink. front


This may have more then one bulb in the front or possibly a bad socket try wiggling the new bulb in the socket to see if it will work.Compare all turn signal lights that come on the passenger side to those drivers side.Some vehicles also incorporate sidemarker lights with the turn signals.

May 29, 2010 | 2001 Pontiac Aztek

1 Answer

2001 Toyota Avalon - Rear signals


Check the front lights. Usually if i flashes fast it indicate a bulb is out on that side.

Aug 02, 2009 | 2001 Toyota Avalon

3 Answers

1997 Ford Escort signal problem.


This is the indicator to tell you that either the front or rear turn signal bulb for the direction that blinks rapidly has burnt out. To test this, place the car in park and engage the rapidly blinking turn signal (the engine does not need to be running). Step out and look at the turn signals to find the culprit and go to the autoparts store to buy another (if you have the money, you should just replace both as the other may go out soon).

Jul 06, 2009 | 1997 Ford Escort

1 Answer

Rear turn signal indicator


There is a fuse under the hood in the fuse/relay box by the driver side fender marked LR TURN that is probably blown,each corner has own fuse.

Sep 11, 2008 | 2003 GMC Sonoma Extended Cab

Not finding what you are looking for?
1997 Honda Civic Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...