Question about 1998 Oldsmobile Intrigue
There should be a place on the intake manifold sitting on top of the engine where a radiator hose runs into your engine if you unbolt the two bolts holding it on you will find the thermostat
Posted on Jun 16, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Follow your LOWER radiator hose to where it connects to the engine and remove and replace the housing which it connects to. The thermostat is an integral part of that housing and so you will need to replace the housing. The water inlet housing and thermostat assembly looks like this:
Posted on Oct 24, 2010
The crank sensor is mounted above the starter motor on the firewall side of the engine. The sensor picks up the signal direct off of the crankshaft through a machined hole in the engine block.
I have removed them without dropping the starter but learned that in most cases it is easier to drop the starter down to access it.
Here is a diagram for you.
There you are, hope this helps you.
Posted on Apr 11, 2010
Tips for a great answer:
Feb 08, 2016 | Cars & Trucks
Apr 02, 2015 | 2001 Oldsmobile Intrigue
Jul 21, 2014 | 2001 Oldsmobile Intrigue
Nov 26, 2013 | 2001 Oldsmobile Intrigue
Oct 24, 2010 | 2000 Oldsmobile Intrigue
Apr 25, 2010 | 1999 Oldsmobile Intrigue
May 30, 2009 | 2001 Oldsmobile Intrigue
May 17, 2009 | 2001 Oldsmobile Intrigue
Dec 13, 2008 | 2000 Oldsmobile Intrigue
898 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: