2002 XK8 4.2,all fuses look okboth key fobs not working have had same tested and not faulty , new batteries. have tried the reset ,no good module dry no obvious loose connections
SOURCE: remote key fob stopped working not battery
try reprogramming.process widely available on these sites. 're-programming x-type key fobs'
SOURCE: How do I program S Type Jaguar key fob Year 2000 Jag ?
Seperate key fobs only can be programmed in the following way.
Turn ignition on/off 8 x times (allow all functions to stabilise) after the 9th on - press a button on both remote fobs. then turn ign. off. use good remote to lock and then try new remote to unlock/lock. sometimes it works first time - sometimes you have to repeat actions. good luck.
SOURCE: reprogramming jaguar x type key fob
Your key FOB is easily programmed by yourself without the need of computer, here is how: Push and hold the trip computer button on the left stalk, while holding the button turn the ignition ON and OFF several times untill you hear a confirmation tone from the glovebox area, when the tone is heard, release the button and remove the key from the ignition, immediately after push any button on the Key FOB and you'll hear another tone that confirms the programming.
SOURCE: key fob wont open doors or boot or lock them
you need to reprogram keys with the module. there could be a problem with the module though , you need to check it out
SOURCE: car key fob not working and locking car
i have a rover 25 and the key fob is not opening the car i could use the key to open it but the alarm will go off and cant stop it without the fob...
732 views
Usually answered in minutes!
×