Question about 2007 Dodge Caliber SXT Sport Hatchback

Open Question

How to replace rear tail light on Dodge Caliber 2007?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 59 Answers

SOURCE: How do you replace break lights in 2007 Dodge

Look inside the rear hatch area near the very rear of the vehicle. You should find a removable panel near the brake light housing. After you carefully remove the panel, look for some plastic wingnuts that hold the light housing in, and remove them, you should not need any tools to do this. After the nuts are removed you should be able to gently remove the tail light assembly from the rear of the car. Becareful not to damage the wiring. Now look at the back side of the tail lamp assembly and look for a locking tab on the light socket. Depress the locking tab and twist the light socket about a quarter turn, then pull the light socket away from the light housing. Pull the bulb out and replace it. Then reassemble and your done.

Posted on Aug 27, 2009

Ad
  • 1 Answer

SOURCE: need instuctions to change tail/break lights on 07 dodge caliber

popohead, if people thought it was easy, they wouldn't be here asking. Your reply is useless.

To remove the pins, look a them closely. Notice that there's two little notches cut into the cup that holds the pin. Use a flathead on each side to leveredge them out a little. If that doesn't work at all, you can use a pair of pliers to firmly grip the head of the pin and pull straight out. Quick firm pull.

Once the first pin comes out, the second pin should easily come out. At that point, firmly grip your taillight housing, and pull straight back: Don't try to wiggle it out, and don't try to lift it to one side or the other like a trunk or door. Just pull it firmly straight back like you would a dresser drawer.

Once it's out, the little wiring harnesses come out of the taillight housing with about a 1/4 turn, and the bulbs just slide straight out of those.

Good luck!

Posted on Nov 01, 2009

  • 28 Answers

SOURCE: How do remove the rear lens cover on the tail

The lens covers dont come off. You can access the bulb from inside the trunk. By opening the panels

Posted on Feb 08, 2010

motor1258
  • 6674 Answers

SOURCE: 2007 replacement light bulbs

If none of local autoparts stock them, you'll have to go to dealer.

Posted on Mar 07, 2009

  • 3 Answers

SOURCE: 2007 Dodge Caliber

the fuel filter is located in the fuel tank and is part of the fuel pump module. it is a non-servicibale item

Posted on Mar 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear defroster inop 2007 dodge caliber,rear def.light will not stay on,light stays on if you hold rear def.button on.


The rear defrost has a built in timer in the switch, they can fail and cause this kind of problem.

Jan 23, 2017 | Dodge Caliber Cars & Trucks

1 Answer

Dodge Caliber 2.4L 2007 can not star


Bad starter or ignition switch.

Mar 23, 2015 | 2007 Dodge Caliber 2.4

1 Answer

When headlights are on taillights donot came on


Most American cars are designed to turn off front park lights when you turn on head lamps but not rear tail lights. Your tail lights are wired to park lights. Trace wires back to switch and connect correctly.

Nov 09, 2012 | 2008 Dodge Caliber

1 Answer

How to replace stop light bulb in 2010 dodge caliper


open the trunk, look behind the tail light assembly, if any carpeting exists move it out of the way to reach screws that link to the light assembly, remove them, and the assembly should pop off, then simply remove the old bulbs and put in the new ones. make sure you have the correct size. check modifiedlife.com for size

Jun 08, 2011 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

How do you replace the rear tail light in a Dodge Caliber. Got the plastic plugs out but the light housung wont come off. Are there other fasters to remove


pull the 2 rubber plugs and the seats they are pushed into out, then on the front side on the light (by the back door not the hatch) very gently place a flat head screw driver between the light and the body panel and pull the handle on the screw driver toward the back of the car so you dont scratch the outside of the body panel... the light should pop out of the two rubber seats it sets in

May 02, 2010 | 2007 Dodge Caliber SXT Sport Hatchback

2 Answers

2007 Dodge Caliber R/T dashboard lighting


It may be lose or burned out. Call the local auto-electric shops and ask what they would charge you to replace it

Mar 02, 2010 | 2008 Dodge Caliber

1 Answer

How do remove the rear lens cover on the tail light to replace bulbs on the 2008 Dodge Caliber?


The lens covers dont come off. You can access the bulb from inside the trunk. By opening the panels

Feb 08, 2010 | 2008 Dodge Caliber

1 Answer

My rear window wiper on my 2007 dodge caliber sxt doesn't work


if you pop the fuse in the cigarette lighter outlet, it also kills power to the computer that controls the rear windsheild wiper.. check that first

Jan 23, 2010 | 2007 Dodge Caliber SXT Sport Hatchback

2 Answers

How do you replace break lights in 2007 Dodge Caliber?


Look inside the rear hatch area near the very rear of the vehicle. You should find a removable panel near the brake light housing. After you carefully remove the panel, look for some plastic wingnuts that hold the light housing in, and remove them, you should not need any tools to do this. After the nuts are removed you should be able to gently remove the tail light assembly from the rear of the car. Becareful not to damage the wiring. Now look at the back side of the tail lamp assembly and look for a locking tab on the light socket. Depress the locking tab and twist the light socket about a quarter turn, then pull the light socket away from the light housing. Pull the bulb out and replace it. Then reassemble and your done.

Aug 27, 2009 | 2007 Dodge Caliber SXT Sport Hatchback

2 Answers

Need instuctions to change tail/break lights on 07 dodge caliber


popohead, if people thought it was easy, they wouldn't be here asking. Your reply is useless.

To remove the pins, look a them closely. Notice that there's two little notches cut into the cup that holds the pin. Use a flathead on each side to leveredge them out a little. If that doesn't work at all, you can use a pair of pliers to firmly grip the head of the pin and pull straight out. Quick firm pull.

Once the first pin comes out, the second pin should easily come out. At that point, firmly grip your taillight housing, and pull straight back: Don't try to wiggle it out, and don't try to lift it to one side or the other like a trunk or door. Just pull it firmly straight back like you would a dresser drawer.

Once it's out, the little wiring harnesses come out of the taillight housing with about a 1/4 turn, and the bulbs just slide straight out of those.

Good luck!

Nov 19, 2008 | 2007 Dodge Caliber SXT Sport Hatchback

Not finding what you are looking for?
2007 Dodge Caliber SXT Sport Hatchback Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...