How to preset radio station on pioneer carrozzeria fh p070md

Your best bet is to contact Pioneer customer service in your area of the world

press the mode button and move it to the other fm frequencies ( fm 2 or 3 etc)

My experience has always been to replace the current station preset with the new.
I recall two process:

1. The first locate the new station that you want and tune the radio to the station. Press and hold the specific preset for several seconds to replace the old station with the new.
2. Tune the radio to the new station and press the set button if so equipped and than press the preset button. In some radios they have group 1 and group 2. In that case press the set button once for set 1 and press it twice for set 2 and then press the preset button.

Hope this has helped?

1. Connect the FM antenna and the AM loopantenna at the back of the unit. Rotate the AM loop for better reception.
2. Press AM/FM.
3. Tune a station by pressing TUNER+/-repeatedly until the desired station is found.Alternatively, you can press and hold thesame buttons down for about one second toactivate the automatic search function. Inthis mode the unit will automatically tunefrequencies until it finds a station.
4. Repeat step 3 to tune to another radio station.
5. Press AM/FMto select between FM and AM.Storing Radio Stations

The unit can store up to 40 radio stations (30 preset stations for FM and 10 preset stations for AM) in its memory. You can enter every single radio station yourself or the unit can store all available radio stations automatically in ascending order

Automatic Preset Programming
1. Press AM/FM to enter the AM/FM mode.
2. Press and hold AM/FM for two seconds to start automatic preset programming.
3. Radio frequencies will be browsed and radiostations stored automatically. When all the available radio stations are stored or all 40(30 preset stations for FM and 10 preset stations for AM) memory locations are full,the auto preset programming function will stop.

Manual Preset
1. Tune to a radio station (see "Manual tuning"for details).
2. Press MEMORY. While the Program Preset number is still flashing, input your desired preset number using the numeric buttons or press CH+/-, then press MEMORY to store it.

Retrieving Preset Stations
1. Press AM/FM to enter the Tuner mode.
2. Press CH +/- to search up or down for thepreset stations or directly press the numeric buttons.

ELECTRORAMA TRINIDAD HAVE BOOT DISC FOR PIONEER AVIC DRZ99..CONVERT FM RADIO TO RECEIVE LOCAL FM STATIONS...PH. # 662-6387 ...DAVID AND DANIEL...

If you have buttons on your radio that allow you to switch stations, it generally is simply a matter of pressing and holding the button in place for 10-15 seconds. The year, make, and model of the vehicle doesn't say much, as vehicle may have an aftermarket radio. Just find the station you want and if there is a are button presets, just push and hold it in. On most of my cars, old and newer that I have owned, confirmation of the setting is generally accompanied by a beep. Good luck! JD

If you are talking about setting the presets so you can just press usually its #1 thru #6 once you have the station you want to preset just hold down the preset button for about 5 seconds. The radio will usually beep, and thats it.

You need your radio code its 4 numbers, you use your radio preset station button to change the # press the 1 station button till you put in your code then the # 2 preset station # then 3, then fourth preset. You should find your code in your service manual. when your code is in, press the + or - button on the station search, or refer to your manual. good luck

Go to the station you like and press one of the preset numbers 1-6

Try just holding the button of choice down. In my Audi, when I had a factory head unit, to set for example, preset 2, I'd just tune to the station I wanted to program, and then hold down the number 2 preset button until the display stopped blinking. It was then preset.