Question about 2006 Pontiac G6

1 Answer

Replace the pontiac G6 center console light - 2006 Pontiac G6

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You should be able to open the cover piece that holds both lights. This piece if you take a flat head screwdriver carefully, just pry the plastic cover (not the actual push buttons), and release it. You should now have access to the lightbulbs for replacement.

Posted on Jul 10, 2009


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 399 Answers

SOURCE: replacing drivers side air bag on 2006 pontiac g6

irst, You must get the steering wheel with controls. I believe part numbers were listed above, but bottom line, make sure you get the right color if you are ordering. The black one is called ebony. Prices vary depending on where you get them. I got mine from a salvage yard brand new for $75. Second, You must replace the clockspring with the column harness. If you have a light duty pickup, you will need part number 26101829. This is for a 2 stage air bag. If you have a heavy duty, order part number 26101828. This is for a single stage air bag. If you are unsure, take off your airbag and look to see if it has 1 or 2 pigtails connected to it. 1 is a single stage, 2 is a 2 stage. GM has reduced the number of part numbers available to simplify things. Therefore, you will get a harness equipped with an additional 8 pin connector. This is for the steering wheel speed sensor for quadrasteer. If you do not have quadrasteer, just tape it to the column and don't worry about it. 

Be careful when installing the harness, there are about 14 connectors, I spent 2 hours installing the harness and wheel. 

Posted on Dec 06, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to remove the heater core in a Pontiac g6 2007

You will need to remove the center console, glove box, A/C controls and radio, the outer heater box and the heater core cover. Make sure you disconnect the heater hoses under the hood too.

Nov 03, 2016 | Pontiac Cars & Trucks

1 Answer

How to replace seat in a pontiac g6?

get a code reader and find out specifically what the problem is. It's definately not the module bacause the module is located in front of the center console. you might have gotten the wires wet.

Aug 01, 2014 | 2006 Pontiac G6

1 Answer

Blend door motor actuator removal

It's located on the left side of the HVAC case under the dash, about halfway up the case. On the drivers side, close to the side of the center console.

Dec 29, 2013 | 2006 Pontiac G6

1 Answer

2008 pontiac g6 automatic shifter light replacement

There was a recall on this type of issue. Check with your GM dealership for the recall on the gear shift indicator, perhaps it can be fixed with this recall.

Jan 30, 2013 | 2008 Pontiac G6 Sedan

1 Answer

Remove center console in a pontiac G6

Remove center console in a pontiac G6

May 26, 2012 | 2006 Pontiac G6

1 Answer

2007 Pontiac G6 brake lights stay on when driving and when I brake they turn off. (Opposite of what the brake lights are for). I have had the brake switch replaced and it didn't fix my problem.

Problem is caused by a bad connection between the body control unit and the wiring harness computer. Remove the cover panel located at the center console at the left of the front passenger footwell. The body control unit is under this panel. Unplug the blue connector from the control unit first pushing up on the grey retainer clip and then pulling the blue connector out of the socket. Smear some dielectric grease into the connector pins and replug the connector. Put everything back together. Do this with the ignition off so no power is going to the module. This should fix the problem--very common on this vehicle.

Jun 15, 2010 | 2007 Pontiac G6 GT Convertible

1 Answer

Center High Mounted Stop Light will not

my light in the back dont come on

May 07, 2010 | 2006 Pontiac G6

3 Answers

Brake lights stay on when in park

brake light switch on the brake pedal under the dash. Have a look at that.

Oct 14, 2009 | 2006 Pontiac G6

2 Answers

Mis. plug ins on center console wont work

sounds like blown fuse for accessories , look in owners manual , should have a fuse location and fuse location map , i have noticed a lot of fuses blown because of cell phone chargers

Feb 23, 2009 | 2006 Pontiac G6

Not finding what you are looking for?
2006 Pontiac G6 Logo

Related Topics:

616 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides