Question about 2004 Chrysler Crossfire

3 Answers

I cannot program my new key for my 2005 Chrysler Crossfire.

I found directions on how to program it on the internet. Toses did not work. I went to the dealer and they gave me directions. They didn't work.

Posted by on

  • jbshennan Jun 16, 2009

    When I bought my 2005 Chrysler Crossfire two months ago it only had one key. We purchased a key on the internet and I got a local locksmith to cut it.
    I had instructions from the internet regarding how to program it. These directions did not work. I took the car to the local dealer and he gave me another method of programming the key. It also did not work. From postings on various sites on the internet I find that this is not an unusual problem. Pleease give me proper instruction about how to program this key.

  • jbshennan Jun 16, 2009

    The key that I have is the gray one that can be programmed.

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 81,424 Answers

U can't do this yourself, this FOB key programming requires the use of a special electronic scan tool called a DRB3, the dealer who told u this was dead wrong about this being a do it yourself, earlier models were, but not this model, the tool cost about $3000.00 and is a dealer only tool

Posted on Jun 16, 2009

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 987 Answers

You'd have to have access to a StarScan tool I believe. On the one that is just a key, it used to be that the grey ones had the chip in them that could be programmed and the black ones did not; so it may only be useful as a spare door key, but not to start the car.

Posted on Jun 16, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

WE GOT NEW KEYS CUT BUT CAN'T PROGRAM THEM TO START THE CAR. INFO CHRYSLER HAS ABOUT THE PROPER PROGRAMMING CODES FOR THIS PARTICULAR CAR DOESN'T SEEM TO MATCH THE CODE ACTUALLY IN THE CAR........(IF THAT MAKES SENSE.) THE OEM KEY WE HAVE IS PRETTY WORN AND APPEARS TO BE ORIGINAL. WE ARE DODGE BUT SENT IT TO 2 CHRYSLER DEALERS AND STILL NO LUCK. IF YOU HAVE SOME INSIGHT, WOULD YOU PLEASE CONTACT JAY - 814-942-9000 OUR SERVICE MANAGER. HE CAN CLARIFY THE ISSUE BETTER THAN I. MANY THANKS.

Posted on Jun 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost remote need to open back hatch on buick rendevous 2004


You can buy replacement key fobs for it on the Internet. It is the only way I can open my hatch. Mine broke where the keychain went so I ordered a couple off of Ebay. They are pretty inexpensive and you can get different colors. You just have to order ones specifically made for your car. They will give you directions on how to program it to use with your car. My dealer emailed them to me. It mainly involves pressing buttons on the fob and taking your key in and out of the ignition. Very easy to do. Hope this helps. The remote was the only way I could open my hatch as the touch pad dosen't work. I found a place to order one and will be replacing it along with the hatch strap.

Dec 26, 2012 | 2004 Buick Rendezvous

1 Answer

Engine wont turn over when it does runs poorly


Resetting the PCM/or computer for the car. Whenever you do work to any car with a computer, it needs to be reset or else it's programming remember all the old settings. You can generally do this by unhooking both battery cables for 15 minutes, and rehooking to reset. If this does not work, ask a Nissan dealer/shop

Aug 28, 2012 | 1995 Nissan Pathfinder

1 Answer

I just got a 2005 F350 DIESEL and I do not have the keyless entry code is there somewhere on the truck I can find the factory code to use.I am trying to a avoid going to the dealer for the programing due...


I just looked at the manual for it. It didn't even say it had keyless entry. You are tlking about a keypad on the door? Or a wireless remote? If it is wireless you can look at online manual for it and it tells you how to program it.
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
If it is door key pad I had same problem with a lincoln I had. Everywhere I looked on internet told me the codes was either under the dashboard below the glove box or on the trunk hinge. They are on the box that controls the door locks. I looked and looked. And finally found it behind the driver side door panel. It was five numbers on a sticker, right on the control box. I hope this helps.

Oct 25, 2011 | 2005 Ford F 350 Super Duty

1 Answer

Have a 2003 navigator, my youch screen on my radio/ navigation etc went dark, the screen completely still work's but cant see anything...any suggestions?


Check the display settings, try resetting your nav to factory settings if that didn't help, you have to visit the dealer due to programing issue or software issue.
good luck

Oct 04, 2011 | 2003 Lincoln Navigator

1 Answer

Need instructions on how to reprogram my keyless entry remotes. Found some online but they didn't work


some of them you turn egnition on but not start open driver door. lock door lock by hand.aim remote at sensor and hold down lock button on remote till you hear it lock. within 15sec after you hear it lock turn key off and then back on but not start then turn key off and it should be good to go.,.... i hope. i got one from keyless ride.com took about 15sec. to program and only 50$ for what dealer wanted 250$ good luck hope this helps

Sep 15, 2011 | Buick Regal Cars & Trucks

2 Answers

Hello I need diagram of volvo s40,t4of engine mount thank you


You didn't mention the year of your vehicle so i just went out on a limb and gave you the only ones I had. These are for the 1996 - 2000 s40. I hope this is the right year span for your sake. There are more then one motor (engine) mounts for your vehicle. I went on and gave you what was in the program. I hope this helps you and good luck.


clifford224_211.jpgclifford224_212.jpgclifford224_213.jpgclifford224_214.jpg

May 06, 2011 | Volvo S40 Cars & Trucks

2 Answers

06 mazda3 keyless remote programming instructions


It should be hit the unlock button 3 times, open and close the door 3 times, the locks will operate themselves twice. Hit the unlock button on the remote and it should program. you should try a remote from the dealer not from ebay.

Sep 20, 2008 | 2006 Mazda MazdaSpeed

Not finding what you are looking for?
2004 Chrysler Crossfire Logo

Related Topics:

1,719 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

81423 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...