Question about Lexus GX 470

1 Answer

Tire pressure light - GX 470 Lexus Cars & Trucks

Posted by on

  • 3 more comments 
  • trangrepair Jun 17, 2009

    yes .pressure is ok. I clear code is light off but when car running with high speed is light on

  • trangrepair Jun 17, 2009

    sensor is correct . read code is 6121

  • trangrepair Jun 23, 2009

    i used scaner to read code . numbercode is c6121 . what is it?

  • yadayada
    yadayada May 11, 2010

    U DIDN'T SAY THE TIRE WAS CHECKED AS I ASKED. DID NOT ASK ABOUT THE CODE NUMBER FOR THE PROBLEM

  • yadayada
    yadayada May 11, 2010

    have u tested the tire pressures? are they correct?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Believe it or not, check the spare!!! Make sure ALL your tires have the correct pressure in them including the spare.

Posted on Jun 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tire Pressure and Engine Light came on at the same time


fix tire pressure first make sure all tires have right tire pressure.to reset low tire pressure light drive vechicle 15 miles an hour for 10 minutes when tire light goes out.then see if check engine light turn off off if not have auto zone do a code scan see what causing check engine light to turn on.

Jul 14, 2013 | 2010 Dodge Avenger SXT

1 Answer

How to reset tire pressure light on for Rx 350 2007


The tire pressure is low then required. Make sure you have checked the tire pressure on all 5 tires. Yes i said 5, including the spare tire. If the spare tire pressure is low then also the light will also come on. ---------- Click this link below to get more details:--- http://technoanswers.blogspot.com/2011/10/tire-pressure-light-on-for-lexus-rx-350.html ----------- This should help.Thanks.Helpmech.

Oct 10, 2011 | 2007 Lexus RX 350 FWD

1 Answer

Tyre pressure warning light showing when pressures are correct


Hi, the tire pressure monitor detects any changes in the tire inflation pressure. Therefore, it must initialize and store it in its memory if the tires or wheels have been replaced, re-inflated or the tires have been rotated. You can re-initialize the system by following these steps:

1. Check and make sure that your tires are inflated to the correct pressure

2. Turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (in the glove box) until the warning light turns off and then release the switch.

3. Now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. Initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

May 13, 2011 | Renault 18I Cars & Trucks

1 Answer

What does an ! in a circle mean with ( ) around it


This (!) symbol is your TIRE PRESSURE MONITORING SYSTEM (TPMS) warning light.
The manual has this to say about it:
This system monitors tire pressure. if the low tire pressure warning light illuminates, check the tire pressure in all four tires. Adjust the low tire pressure to the recommended cold tire pressure shown on the Tire and Loading information label located in the driver's door opening. After tire pressures are adjusted, the vehicle will need to be driven at speeds above 16 MPH (25 km/h) to activate the TPMS and turn off the low tire pressure warning light.

Mar 02, 2011 | Nissan Pathfinder Cars & Trucks

1 Answer

Check tire pressure light keeps coming on even when tire pressure


16 INCH OR BIGGER TIRES TIRE PRESSURE IS AT LEAST 44 PSI. YOUR TIRES PRESSURE STILL LOW.

Jun 14, 2010 | 2002 Cadillac Deville

1 Answer

Tire pressure light comes on


You shouldn't be setting the tire pressure to the max inflation pressure listed on the sidewall, that will likely result in uneven tire wear with the center of the tire wearing out prematurely. You should set the pressures according to the listings in the door jam. Most likely 32-34psi. Also, have you checked the spare tire? Some systems monitor and will illuminate the TPMS light if the spare tire pressure isn't within an acceptable range. The spare is often overlooked when checking tire pressures because of a TPMS indicator.

May 11, 2010 | 2005 Scion tC

2 Answers

DEASH LIGHT LOOKS LIKE A TIRE WITH ! IN CENTER


Low tire pressure warning. 2007 and up vehicles have a TPMS (Tire Pressure Monitoring System). Refer to your owners manual.

Sep 30, 2009 | 2008 Toyota Tacoma

2 Answers

A yelloow light inside dashporrt light up ( ! )and is something like this and i don't know what is it.


The light that you speak of is the Low Tire Pressure warning light. This light comes on if your tire pressures are not at the right pressure. Inflate the tires, and the light should go out.

Sep 27, 2009 | 2008 Toyota Sienna

1 Answer

Changed right front tire now reads zero on dash light is on


Your tire pressure monitor needs to be reset whenever you change or rotate your tires...

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 24, 2009 | 2008 Chevrolet Tahoe

3 Answers

The check tire pressure light and ABS auto traction sensor light keep coming on. Tire pressure is good


The tire pressure monitor detects any changes in the tire inflation pressure. Therefore, it must initialize and store it in its memory if the tires or wheels have been replaced, re-inflated or the tires have been rotated. You should be able to re-initialize the system by following these steps:

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 11, 2009 | 2004 Cadillac Deville

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...