- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Does you window roll up and or down using a different window control than the one you are using now? If it does then replace the broken control panel that is malfunctioning. You also have a fuse in the panel under the dash on the drivers side that controls the windows. Check that as well. If these do not remedy the problem then you will have to remove the door panel where the malfunctioning window is at and inspect the regulator/motor. One of these three will be the solution.
there is no driverside window fuse. The power window system works nsync with each other. If a fuse is out all windows will not work. Have the electrical connector checked on the switches or motor pwr connector. Also inspect the window regualator for damage. Hopefully this helps!!
you should check the fuses first, then ensure power to the motor in the passenger side if no power check the switches for the power windows. Also it is common for window motors/ regulators to fail and have to be replaced. If the driver's one is running slowly remove door panel and lubricate the cables and tracks with some rust check or wd 40 etc, etc... and silicone lube on the guide tracks at either end of the window. hope this helps
possibly your power window regulator is out. basically check the fuses first to make sure you have not blown that, if it is good, then you can order a new window regulator from the dealer or online @ autopartswarehouse.com. to replace the window regulator you will need to will need to remove the door panel, start with the screws on the handle and the arm rest, covered with a plastic cap. the door panel which can be pryed from the bottom with a flat blade screw driver or flat pry bar, it will make a snapping sound. three bolts on the regulator 4 bolts on the window tracks and 2 bolts securing the window, re assemble as you have taken apart, Good Luck!!
The door panel is held on by plastic clips.. first check behind the door handle and see if there are bolts or screws there. then start on the bottom and pry the panel loose starting on bottom of panel and then going up the sides with a flat blade screw driver. once you have gotten sides and bottom loose pickup on the door panel to release it from the window ledge this is how the top is held in place.. holler if you need more info .. Jerry
it sounds like the window switch unit in the drivers door is malfunctioning. The other possability could be the multiplex unit that all the wiring runs through. may want to have diagnostics run by a mechanic or honda dealer.