Question about 1999 Chevrolet Suburban

1 Answer

Headlights will not come on...No battery voltage to headlamps

I checked the head lamps and have no voltage at any of them...parking, brake and tail lights are working. Could it be the switch....there are no relays or fuses for headlamps.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 378 Answers

There is a fuse for it, check very carefully near the driver side or in the hood. it might be the fuse.

Posted on Jun 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail lights not working fuse is good bulbs are good. What do I need to check now. 2008 Pontiac G6


What fuse is good ? Did you check fuse in rear fuse box ? Also did you check park lamp relay .
Park, Tail and Marker Lamps
The park, tail, and marker lamps, including the license lamps, are turned ON when the headlamp switch is placed in the PARK or HEADLAMP position, or anytime the headlights are requested. The PARK LAMPS fuse in the rear fuse block supplies battery positive voltage to the PARK LAMP relay switch contacts. The PARK LAMPS fuse in the rear fuse block also supplies battery positive voltage to the PARK LAMP relay coil. When the park lamps are turned ON, the body control module (BCM) energizes the park lamp relay. Current flow is from the PARK LAMP relay to their respective park and marker lamps and to ground. Ground is provided at G101, G102, G401, and G403.
Fuse Block - Rear
Left side of the rear compartment, behind the left rear wheel well

Jan 08, 2017 | Pontiac Cars & Trucks

1 Answer

2000. Where is fuse for tail lights?


Do your headlamps work ?
Park/Marker/License/Tail Lamps
Voltage is applied to the turn/headlamp switch at all times. When the turn/headlamp switch is in the PARK or the HEAD position, voltage is applied to the following components:
?€¢
The park lamps


?€¢
The marker lamps


?€¢
The tail lamps


?€¢
The license lamp

The front marker lamps are grounded through the turn filament of the respective front park/turn lamp. The front marker lamps light as a result.
The automatic lamp control function turns on the park lamps and the headlamps. This action occurs when the ambient light sensor determines that the exterior lamps should be turned ON based on the amount of available light. When the BCM grounds the park lamp relay, voltage is supplied directly to the park lamps, bypassing the turn/headlamp switch assembly. When this action occurs, the following conditions exist:
?€¢
The automatic lamp control relay is grounded.


?€¢
The headlamps turn ON. Refer to Headlights/Daytime Running Lights (DRL) Circuit Description .

The lamps turn OFF when the BCM does not ground the park lamp relay or the automatic lamp control relay. This action is caused by the following conditions:
?€¢
The available light reaches a predetermined level.


?€¢
The ignition switch is turned to the OFF position

Mar 31, 2016 | Pontiac Grand Am Cars & Trucks

2 Answers

I have a 2007 Chevy HHR..the tail light don't work the bulbs workI have turn signals and brake lights..no owners manual in car. check fuses can't locate the fuse for tail light is there another place


Your talking about the rear park lamps, but, do the front park lamps work?
Note the picture.
Underhood fuse box, 68 is park lamp relay, 69 is park lamp fuse.
26139691-ogmtu0xiyqttvnd1jjcu4dmt-2-0.jpg

Mar 23, 2016 | Cars & Trucks

1 Answer

The instrument panel cluster,tail (driving) lamps,& license plate lite do not lite. fuses 9,14,20 are ok. what else could be bad or broke?


Check fuse's #19 ,# 6 #4 check grounds 105 & 107
G107 In the left rear of the engine block next to the knock sensor. G105 In the thermostat housing
The park, tail, marker and license lamps are turned on when the headlamp switch is placed in the PARK or ON position or anytime the headlights are requested. The PK LPS fuse in the IP fuse block supplies battery positive voltage to the park lamp relay and the headlamp switch. The body control module (BCM) provides a ground, or control circuit, to the park lamp relay coil circuit during ALC operation. When the park lamps are turned on during ALC, the BCM energizes the park lamp relay. The park lamps can also be supplied battery positive voltage directly from the headlamp switch. Current flow is to the park, tail, marker and license lamps. The front park and marker lamps are grounded at G100 and G101. The rear park, tail, marker and license lamps are grounded at G400 and G401. If the headlight switch is left in the ON position, the park, tail and marker lamps will remain on until turned off or the battery runs dead.
Check the headlamp switch !

Oct 29, 2015 | 2005 GMC Safari Passenger

1 Answer

Why wont the headights or running lights work on my 2002 Buick LaSabre?


There are several reasons why your headlamps an running lights don't work , the headlamp switch is a good one ,plus relays an the DIM - dash integrated module an associated wiring ! Here is how the headlamps work , right out of Buick factory service info !
The dash integration module (DIM) provides battery positive voltage to the signal circuits of the headlamp switch. The signal circuits include the headlamp switch headlamps on signal, the flash to pass switch signal and the high beam input. With the headlamp switch in the ON position, a ground path is available for the headlamp switch headlamps on signal circuit of the DIM through the headlamp switch. The DIM provides ground to either the headlamps high beam relay control circuit or the headlamps low beam relay control circuit of the low beam circuit. The position of the headlamp dimmer switch determines which relay control circuit has ground. The DIM supplies battery positive voltage to the relay control circuits, if the headlamps are necessary. The fuse block - underhood supplies battery positive voltage to both relay switch circuits. When the low beam relay control circuit is energized, current flow is to both low beam fuses and to the low beam headlamps. The headlamps have ground at G103 and at G401. When the headlamp high beam relay control circuit is energized, current flow is to both high beam fuses and to the high beam headlamps. The high beam circuit is divided into a left and right side circuit. The current flow of the left high beam is from the fuse to the left high beam lamp. From the lamp, the current flows to the normally-closed contact of the DRL relay to G103. The current flow of the right high beam is from the fuse to the right high beam lamp. From the lamp, the current flow is to ground at G401. When the headlamp dimmer switch lever is pulled toward the driver, the flash-to-pass switch closes. This grounds the DIM flash to pass switch signal circuit. In response to this input, the DIM energizes the HDLP HI BM relay. Both high beams remain on until the driver releases the switch handle. If the low beam headlamps were on during a flash to pass operation, the low beams remain on. The headlights may be switched to high beam with the opposite movement of the headlamp dimmer switch lever.
By running lights , do you mean park lamps or day time running lamps ?
Park, Tail, License and Marker Lamps
The park lamps, including the license lamps, are turned on when the headlamp switch is placed in the PARK or ON position or anytime the headlights are requested. The fuse block - rear supplies battery positive voltage to the switch contacts of the Park LP relay. When the headlamp switch is in PARK or in ON, the park lamp switch on signal circuit of the DIM has a ground path. The DIM provides battery positive voltage to the control circuit of the Park LP relay. When the park lamps and/or the tail lamps are ON, the DIM energizes the park lamp relay control circuit. This closes the switch contacts. Current flows from the Park LP relay to the LH PARK LP and the RH PARK LP fuses. From the fuse, the current flows to the park lamps. The left park lamps are grounded at G103, G401 and G402. The right park lamps and the right tail lamps are grounded at G103 and G401. The DIMR fuse supplies battery positive voltage to the license lamps and to the DIM instrument panel lamp fuse supply voltage - 1 circuit, for interior lamps dimming. The license lamps are grounded at G401.
The best advice I can give is that you take this to a ASE certified professional repair facility unless your a qualified automotive electric repair person !
Diagnostic Starting Point - Lighting Systems
Begin the system diagnosis with the Diagnostic System Check - Lighting Systems . The Diagnostic System Check will provide the following information:
?€¢
The identification of the control modules which command the system


?€¢
The ability of the control modules to communicate through the serial data circuit


?€¢
The identification of any stored diagnostic trouble codes (DTCs) and their status

The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.

The

Mar 15, 2015 | 2002 Buick LeSabre

3 Answers

Why the brake light works and tail light don't work Chevrolet avalanche 2003


they are dual filament bulbs so the tail light filament might have blown and not the stop light , replace the bulb to check

Jul 18, 2014 | 2003 Chevrolet Avalanche

1 Answer

Grand Prix 2003 first no running lights tail lights or cluster lights. All fuses were good. Changed out the small box under the steering column. Not the chime box. After doing that I had running lights...


Daytime running lamps control module. Fuse #37 - inside the passenger compartment or under hood fuse box ? Do you know how to use a volt meter an wiring diagram to find electrical problems ? You have a direct short to ground or fuse #37 wouldn't blow. Underhood fuse box fuse # 37 is for the park lamps .Supply's B+ voltage to the daytime running lamps module an the headlamp switch plus 37
PARK LP Fuse
20A
Headlamp Switch, Body Control Module (BCM), and Vehicle Interface Unit (VIU)...
Park, Tail and Marker Lamps
The park, tail and marker lamps, including the license lamps, are turned ON when the headlamp switch is placed in either the PARK or HEADLAMP position, or anytime the headlights are requested. The PARK LP fuse in the underhood accessory wiring junction block. When the headlamp switch is placed in the PARK position, battery positive voltage is applied to the park lamp circuit. The parklamp circuit then applies battery positive voltage to the DRL control module and to all the marker, park and tail lamps. The front park lamps are grounded at G101. The rear park lamps are grounded at G302. The license plate lamps are a part of the rear park lamp circuit and are grounded at G302 The inadvertent power control feature prevents the park lights from remaining on more than 10 minutes if left ON. If the park lights are turned ON after the ignition switch has been turned OFF, or is in the ACCY position, they will remain ON until turned OFF or the battery runs dead.

Finding The Source Of Electrical Shorts In Your Car

Jun 16, 2017 | Cars & Trucks

1 Answer

2001 Monte Carlo SS 3.8 v6 Rear park lights are out as well as the dash lights, brake lights work headlights work front running and park lights work, all turn signal lights work. replaced headlight switch...


Park, Tail, Marker Lamps, and License
The park, tail and marker lamps, including the license lamps, turn on when the headlamp switch is placed in either the PARK or the HEAD position, or anytime the headlamps are requested. The RT I/P #1 fuse in the RH I/P fuse block supplies battery positive voltage to both the park lamp relay switch contacts and to the park lamp relay coil circuit. The park lamp relay coil is controlled by the body control module (BCM). When the headlamp switch is placed in the PARK position, the BCM energizes the park lamp relay coil control circuit.
Current flows from the park lamp relay switch to both front and rear park lamp fuses and to their respective park/tail lamps. The front park lamps are grounded at G101. The rear park lamps are grounded at G302. The license plate lamps are a part of the rear park lamp circuit and are grounded at G302. The inadvertent power control feature prevents the park lamps from remaining on more than 10 minutes if left on. If the park lamps are turned on after the ignition switch has been turned OFF, or is in the ACCY position, they will remain on until turned off or until the battery runs dead.

Did you the REAR PARK LP fuse 15 amp in the right insturment panel fuse box.

Jul 18, 2017 | 2001 Chevrolet Monte Carlo

2 Answers

No tail lights or dash lights


https://s8.postimg.org/5js3uvryd/park_lamps.jpg
Click on the link.
Did you check fuse circuit for voltage? Use a test light with headlamp switch on to check for voltage. See the park lamp relay, I'm not saying the relay is faulty, but, you might be able to use jumper wire on load side of relay, if lamps work, the problem is on control side of relay, for some reason.
The load side of relay is that line with arrowhead. There could be other issues.

Apr 13, 2017 | 2001 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...