Question about 1998 Ford Explorer

2 Answers

Turn signal fuse

I do not have an owners manual! I need to know the fuse # for turn signals on a 1998 explorer!! Urgent plz!!!!

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 701 Answers

Hello jleigh70: My name is Roger and I will answer your question. On the driver side of the dash when you open the door is a cover that should say fuses. Remove the cover and locate fuse # 10. Should be in the 3 rd. row down from the top. This is the fuse for the turn signals. Should you need any further help please just ask. Please rate the quality of your answer as this will let us know you received the correct information. Thank You for using Fix Ya. Roger

Posted on Jun 16, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

Most manufactures mark the fuse block(holder) look for trn sgl.marking on where you plug in fuse

Posted on Jun 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Does any have a wiring schematic for a 98 ford explorer xlt?

Best thing is to do a Web search titled "1998 ford explorer wiring diagram". This will give you results which include fuse boxes and power boxes and color coded wiring routing. Check for other items that are on the same fuse as the turn signals to see if they work. The turn signal flasher unit could also be bad.

Sep 24, 2014 | 1998 Ford Explorer

1 Answer

Where is the turn signal fuse flasher in a 1998 Ford Windstar?

According with your owners manual, the flashers are located in the passenger compartment fuse and relay box. If the turn signals operate in only one direction, a bulb is probably burned out. If they do not operate in either direction, a bulb on each side may be burned out, or the flasher may be defective. Also the hazzards use the same flasher as the signals.

If you need other details or this Windstar Owners Manual, just contact us.

Hope this helps (remember to rating this answer and leave some testimonial comment).

Oct 08, 2011 | 1998 Ford Windstar

3 Answers

Click on this link and it will take you to the owners manual. Page 138-143 has diagrams of the fuse boxes both in the cab and under the hood. To include what fuse/relay goes to what.

Jul 22, 2011 | 1998 Ford Explorer

1 Answer

I need to know where the primary source power is for my 2003 ford explorer turn signals. The 7.5 fuse is good and the wires have no power.

look in your owner manual for fuses that operate the turn signals. There is a fuse box under the hooh and one inside the truck under the dash. If you don't have manual, go to, por center, tech info, owner manual.

Jan 01, 2011 | Ford Explorer Sport Cars & Trucks

1 Answer

No trailer turn signals tail lights work . you

If it is a factory trailer package then there are fuses for the left turn signal and the right turn signal for the trailer connector. Check your owners manual for the location of these two fuses.


Apr 21, 2010 | 2002 Ford Explorer

2 Answers

Turn signals not flashing on a 1998 Old Intrigue,

Do the lights come on but, just don't flash? It could be the turn signal flasher. The owners manual should show the location.

Feb 20, 2010 | 1998 Oldsmobile Intrigue

1 Answer

Turn signal does not work, and neithr d the hazards, I know they are on the samefuse but which one?

What you know sometimes inst so, Fuse #10 and #21 power the hazard/turn signal flasher. Maybe the turn signal switch is bad.

Nov 18, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
1998 Ford Explorer Logo

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides