Question about 1995 Jeep Cherokee

1 Answer

Instament cluster not working on 95 jeep cherokee

My battery was replaced recently and it was instaled backwards (- to +) and it blew my alternator and sevreal fuses. i replaced the alt and all the fuses but the fuse that goes to the instrament cluster (number 10 fuse) keeps blowing when i replace it. what do i do? is my wireing or cluster bad? i think that if it was the cluster that it wouldnt blow the fuse it just wouldnt work so im leaning towards the wireing being out/

Posted by on

  • blue_6 Jun 18, 2009

    Everything else works fine its just the cluster that doesnt. why would a fried cluster keep blowing the fuse though? iv read about changing the cluster and any cluster from a 91to a 96 will work and it will make it so i dont have to have idiot switchs anymore.



    ill try the cluster and let you know what happens.



    thanks for the help!!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 161 Answers

You need to replace the cluster if you can find the "exact" model in a junk yard with "low" miles then get that one otherwise it might be best to buy new and you need to have the "body control module" checked. all widows and doors work? have it checked but your cluster is fried.

Posted on Jun 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All the gauges are not working on my 2004 jeep


the dash gauge cluster fuse blew

im answer assumes all else works on car and drivers perfectly

Oct 15, 2014 | 2004 Jeep Grand Cherokee

1 Answer

99 ford explorer xlt wont stay charged


Did you take it by a parts store ? Most will check charging system for free ! Is the charge indicator light lit on the instrument cluster while the engine is running ?

Mar 24, 2017 | Ford Cars & Trucks

1 Answer

Hey I have a 94 Grand jeep Cherokee Larodo I was wondering what the code list was or where to find it. I think it may have to do with the alternator as my battery charge is low, and it recently blew the...


You can find a code list in either chilton or haynes manuals. You can get them at most larger parts stores. While there, have your charging system and battery tested (most do that free). If necessary you can also have your codes scanned (also most times free).
If you do that it's likely you will have a good idea what needs to be fixed!

Mar 04, 2011 | 1994 Jeep Grand Cherokee

1 Answer

My out of town son-in-law recently rebuilt the engine on my '95 Jeep Grand Cherokee (V-8). After a few hundred miles the car began running rough. Took it to local mechanic and he said it...


No you can't just replace the round part you have to replace the entire assembly and there is no trick to replacing it, It's really an easy job.

Aug 25, 2010 | 1995 Jeep Grand Cherokee

2 Answers

99 jeep cherokee sport 4.0l 6cyl voltage will go to 19v


The problem sounds intermittent, if you put volt meter on the battery while it is at that 19volt mark/reading(on the gauge cluster) you will be able to see if it is true. If your alternator is really charging over 16volts the lights should be getting brighter then usual and/or they are burning out. Find out ASAP, if the alternator has a defective voltage regulator, it needs to be replaced. Prolong use will damage components.

Jun 18, 2009 | 1999 Jeep Cherokee

1 Answer

1988 jeep 4.0 battery installed backwards now cranks but wont start


have you checked all ofyour fuses? usually when you hook up a battery backwads you end up blowing a fuse and or fry your alternator on older modeled vehicles as there is no protection for it.

Oct 18, 2008 | 1988 Jeep Cherokee

4 Answers

Jeep cannot hold a charge


This happened to me once, but that guy that put my battery in crossed the wires and blew a bunch of fuses. I thought it was my alternator but it wasn't. I removed it and tested it, it was fine. Make sure you double check before buying expensive things. Anyways, it was just a fuse, I can't be sure which one it was exactly but I replaced 3 of them. Two #60 fuses (which I'm assuming were the problem because they were fuses for the alternator) and another one that I can't remember now. Anyways, if your having a problem like this replace all your fuses first, all of them together would only cost about 15 bucks. If the problem persist remove your alternator to test it because you'll get a more accurate reading this way. If its not your alternator or fuses, I don't know.

May 17, 2008 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Cherokee Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...