Question about 1992 Ford Ranger

1 Answer

Fuel pump i got a 92 ford ranger xlt with a 2.3l in it and when you turn the key the fuel pump wont come on. ive replacer my sending unit and changed the fuse in power ditribution box and it worked for about 2 weeks like it was brand new. now the fuel pump wont come back on when you turn the key unless you turn the key off, pop the hood, and tap on the power ditribution box then get back in the truck turn the key and it will start cant figure out what the problem is any ideas???? thanks P.S. ITS IN MY TANK

Posted by on

  • twstanley Jun 19, 2009

    bad igniton switch

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Your fuse might be loose?

Posted on Aug 14, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 11 Answers

SOURCE: fuel pump wont come on

bad ground wire? worst case you can run your own swicth to the pump but this woud be run off the ignition so the key must be on . is it in your tank or exturnal on the frame of the truck?

Posted on Jun 16, 2009

  • 1 Answer

SOURCE: my 92 ranger XLT hood will not close, 4 cyclinder,

In the front of the hood latch ( to the left and right of the unit) there are two mounting screws that actually hold the hood latch piece together. If those screws are loosened the latch can be moved left and right. Align the latch piece to the hood to make sure the hood catches.As long as the latch itself will work by pushing it down this works and it also helps with tight tension issue on the pull chord from inside of the cab.

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am in need of under dash fuse panel diagrams backside power side 92 Ford ranger xlt.


Confused by 'backside power side', but

Just Google

92 Ford Ranger XLT fuse box
And look at the Inage tab.

Or if you are after wiring details

92 Ford Ranger XLT wiring schematic

Jan 26, 2016 | Ford Cars & Trucks

1 Answer

A guy just told me that there is a internal fuel pump and a external fuel pump on my 1988 ford ranger xlt 2.9 4x4. is this true?


In some applications, yes there is two.


On the 2.3L and the 2.9L engines to model year 1988 the electric fuel pump system used on these EFI engines consisted of two fuel pumps: a low pressure boost pump mounted in the fuel tank, and a high pressure fuel pump mounted on the frame rail.
The low pressure electric fuel pump is located in the fuel tank and is a part of the fuel gauge sending unit.

May 07, 2011 | 1988 Ford Ranger

1 Answer

2001 ranger wont start after sitting


check the fuel pump and see is working properly, if the pump is good than the problems will be the crank sensor is faulty. what crank sensor does it sense the turning of the flywheel and it send a single to ecu, and ecu send a flow of power to turn on the fuel pump as long it sense the flywheel turning.

Oct 04, 2009 | 1998 Ford Ranger SuperCab

1 Answer

I just bought a 92 4,0 ranger xlt. When it warms up it loses fuel pressure and idles rough and dies when I come to a stop. I have to turn the key off for about 5 seconds and try to restart. Sometimes it...


You could have a slight vaccum leak that is preventing the fuel pressure regulator to operate correctly.

You fuel pump could be on the way out as well

You could have a crack in a fuel line

Have you changed your fuel filter?

Could be a couple of things, start there and see where it gets you.

Aug 20, 2009 | 1992 Ford Ranger

3 Answers

1994 ranger fuel problem


check your fuel pressure, also check to see if there is a booster pump, some ford rangers have a booster pump inline... fuel injected units need to have at least 35-45 psi some even higher around 50 psi...

Aug 07, 2009 | 1994 Ford Ranger Supercab

2 Answers

Fuel pump wont come on


bad ground wire? worst case you can run your own swicth to the pump but this woud be run off the ignition so the key must be on . is it in your tank or exturnal on the frame of the truck?

Jun 16, 2009 | 1992 Ford Ranger

3 Answers

Truck wont start just clicks.


either a bad body ground,or your tranny is locked up,did it run good before you shut it off?

Mar 11, 2009 | 1992 Ford Ranger

1 Answer

1998 ford ranger xlt


p0102= mass air flow sensor is dirty or needs to be changed.
p0232= recheck your wiring. you might have crossed wires when changing fuel pump or your fuel sensor might be faulty

Feb 18, 2009 | 1998 Ford Ranger SuperCab

1 Answer

1993 ranger 4 cyl.runs fine then wont restart for couple of hours


lisen for the fuel pump to run when it acts up. if u cant hear it then replace the fuel pump relay

Dec 21, 2008 | 1995 Ford Ranger Supercab

Not finding what you are looking for?
1992 Ford Ranger Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...