Question about 2000 Jeep Grand Cherokee
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a tiny little peanut shaped light bulb inside the radio that provides the light for the dial, it is replaceable, you will need to remove the radio, then pull the top cover off the radio chassis, the bulb is under the cover.
Posted on Nov 07, 2008
if you are receiving stations on the higher frequencies then your radio is the problem and not your antenna or anything else
Posted on Jan 15, 2009
SOURCE: 1995 Grand Jeep Cherokee
The lower speeds are controlled by a resistor block. That's what needs to be replace. It's usually located next to the blower. It will have electrical wires connected to it. High speed bypasses the block so it alway works.
If you want to replace it then;
) Disconnect the battery negative terminal if the vehicle have air bags. Wait 2 minutes for system to discharge.
) Remove the kick block on the passenger side. )Remve the glove box ) Remove the bolts holding the blower motor resistor. Push the red lock up and press down on the click ) Pull the block out. ) Install new block and reverse steps above.
Posted on Apr 14, 2009
Tips for a great answer:
Oct 29, 2016 | Jeep Cars & Trucks
Oct 29, 2016 | 1998 Jeep Grand Cherokee
Oct 11, 2016 | 2011 Jeep Grand Cherokee
Oct 05, 2015 | Mazda Cars & Trucks
Jan 15, 2015 | 1997 Jeep Grand Cherokee
Feb 27, 2011 | 1995 Jeep Grand Cherokee
Jan 13, 2009 | 1998 Jeep Wrangler
Jan 12, 2009 | 2000 Jeep Grand Cherokee
33 people viewed this question
Usually answered in minutes!