Question about 2001 Saturn SC

2 Answers

How do i replace a ignition switch in a saturn sc2

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 299 Answers

Takes hammer and small long chisle or puch to back out two screws that have heads sheered.This removes assembly then has two 5.5mm screws retaining switch to housing.

Posted on Jun 17, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a SC2 and recently lost the keys... I had bought the car out of California and it had a rebuilt title. I do know that when the car was recovered, the ignition needed to be replaced and was... What I do not know is that if the new ignition was replaced and chipped or was simply bypassed and installed without the chip. I do , however have several door keys, as they were the original, they only punched the ignition.
I am carless and frusterated. I dont know what to do... I am not trying to go broke fooling with this damn car!!! Can you help me??? Thankyou dearly... MARY COLLAR

Posted on May 03, 2011

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

thabrain
  • 76 Answers

SOURCE: replacing head on 97 Saturn SC2

basically there wanting to know if its a single or double cam your particular model is a double over head cam. casting number should be next to the intake. and slant cam

Posted on Nov 08, 2008

  • 73 Answers

SOURCE: 2001 sl2 saturn inertia switch

if you are refering to a inertia switch like on a ford that kills the fuel pump in a crash, the saturn does not have one

Posted on Mar 31, 2009

  • 73 Answers

SOURCE: 2001 saturn sc2 gets code 341&340 camshaft sensor

if you have high resistance in secondary ign. system (plug wires, ign.coil) this will cause this code to set. make sure you are using a high quality spark plug wire set. not from autozone!!! and denso non platinum tipped spark plugs. also use a diaelectric grease on plug wires to keep moisture out.

Posted on Mar 31, 2009

  • 117 Answers

SOURCE: 1998 saturn sc2 P0303 code just came up. already

p303 is a cylinder 3 missfire I woul first check the coil and then the ingnition module, Then if this dont work you could have a bad injector. If after testing and still no fix you should check the compression in that cyl.

Posted on Jul 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 saturn sc2 will not start


if it is a stander pull the floor mats out of the driver side and try again

Mar 23, 2017 | 1993 Saturn SC2

1 Answer

11. Trans axle Codes present


Saturn Sc1, Sc2, SL1, SL2 Automatic Transmission codes when turning right after a reset or when hitting third gear. Intermittant dash lights dead, fuel pump failure and check engine light says various codes having to do with car starting in gear. Mine had a bad ignition switch which burned up the wires connected to the automatic transmission start satety switch. On the back of the transmission a black plastic device connected to the shifter cable. You must remove the black plastic shield from the upper wire to see if the wires inside are burned on the top connector that has six wires. If they are get a junkyard replacement connector and wires. Replace the ignition switch first to avoid same problem.

Oct 15, 2010 | 1993 Saturn SC1

2 Answers

Saturn 94 sc2


i would check the engine coolant sensor or the switch is bad

Jun 12, 2009 | 1993 Saturn SC2

1 Answer

95 saturn sc2 and the a/c compressor does not engage when I turn on the switch


either it's undercharged or there is something unhooked/ faulty in the electrical system. more than likely undercharged.

May 16, 2009 | 1995 Saturn Sc

1 Answer

Install a new igntion switch


I have the same problem. My key is stuck and won't come out

Jan 04, 2009 | 2001 Saturn SC

1 Answer

97 saturn SC2, it acts like it wants to start


May be a faulty pump,,or control module,,if you replace one,,,replace both.

Nov 13, 2008 | 1993 Saturn SC2

1 Answer

2001 sl2 saturn inertia switch


if you are refering to a inertia switch like on a ford that kills the fuel pump in a crash, the saturn does not have one

Sep 06, 2008 | 2005 Saturn SC2

1 Answer

Steering wheel


your lock cylinder is frozen, it activated the steering lock.
have to take aparta steering colum and replace the ignition lock.

Aug 10, 2008 | 1993 Saturn SC2

Not finding what you are looking for?
2001 Saturn SC Logo

Related Topics:

706 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...