Question about 1993 BMW 5 Series

2 Answers

I have a '93 525I, The driver window has come off track.

The driver side window has come off track. I was able to pull the clips open between the door and inside cover. Now, I am unable to get the inside handle off to completly remove the door panel cover.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It pulls upward off of large plastic piece. Just give it a snug pull straight up and it should come off!

Posted on Sep 19, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Filmmaker:

    Uploaded 5 video answers.

  • Contributor
  • 46 Answers

The clip on the inside handle needs to be pushed in and towards the front of the vehicle. Slight prying with a small screwdriver might be necessary.

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the drivers side door panel on a 89 Camry. My manual crank window is out of the track and the door lock is broken. Also doyou just pull the window crankoff oris there ahidden screw.


The manual crank has a u shaped clip that holds it in place to the crank pulley. U may need a special tool to open the clip and slide it off so you can remove the handle.

Jan 16, 2017 | 1989 Toyota Camry

2 Answers

Rear door panel removal:rear door window just fell down oneday and i was told it might just be off the track. it has electric windows


Its not off the track!!
You just lost the holders clipping your window glass piece.
  • Look for screws in door panel or around the speaker vents.
  • If you are sure that the speaker cant be removed without opening the door panel then read this below.
  • Mostly seen near areas like door lever(inside), power window switch set, bottom and each sides of the whole panel.
  • If its manual window, then look for a circle clip in between the winding window lever and the door panel. Plunge screw driver between them a make a gap then look.
  • Assure that all clips or screws which obstacles the removal of the panel.
  • Simply pull the panel from sides towards you

Sep 23, 2011 | 2007 Chevrolet Malibu SS Sedan New Cars

1 Answer

How do i fix my 1996 honda accord driver side window? When i roll down the window it falls off the track! they are manual, not power.How do I fix?


If you take the door panel off which there is only 2 to 4 screws holding in on and some clips in the back. pull the window to the top of the door and tape in place pull the track up and line track up with the window fully up and make sure to tighten track bolts on both the window and door bolts. hope that helps

Dec 10, 2009 | 1996 Honda Accord

1 Answer

Replace window motor on 1997 del sol


Remove the door handle with one #2 phillips screw, push forward. Push the 2 plasic clips on the release handle and the lock rod by rotating them away from the open end of the clip (clockwise for drivers side, counterclockwise for passenger side). Pull the lock rod and relese out of the clips. Remove the phillips screw in the bottom of the door grab handle. Remove the small black plastic piece on the upper forward corner of the door panel. Remove door panel, should be aproximately 10-12 clips. Once off, you'll see the window motor. Remove the outer window trim. Yes, you WILL break all the clips. I've not had much sucess no matter how careful I am. Use a 10mm wrench or socket to remove the window from the window regulator. You'll see 2 white plastic wedges with 10mm head bolts in them. Pull the window out of the track. If needed, loosen or remove the rear guide track. There also are two 10mm bolts holding the guide rail in. Remove the windoe regulator and motor assembly with (I believe) 3 10mm bolts. Once on the bench, remove the motor from the regulator and reinstall!

Dec 08, 2009 | 1997 Honda Civic del Sol

1 Answer

I have an 1998 Oldsmobile Intrigue and the driver side window is off track, how do i put it back on track?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then pull back the weather seal and you will be able to put it back on the track. You will most likely need to buy some clips to secure it back on

Oct 21, 2009 | 1998 Oldsmobile Intrigue

1 Answer

My driver side window has come off its track on a 2004 chrysler concorde how do I get the window back on track


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you'll be able to get to the tracks. You may need to get some replacement clips to remount the window to the track

Oct 08, 2009 | 1998 Chrysler Concorde

1 Answer

Drivers side window has slipped off track 2006 mazda mpv


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics.

Sep 29, 2009 | 2006 Mazda MPV

1 Answer

Window off track driver side 1997 sebring


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Mar 23, 2009 | 1997 Chrysler Sebring

1 Answer

Window off track


Looking at the opened door from the inside remove the philips screw near the upper hinge. Pry the speaker grill off with a thin blade putty knife, starting at the bottom left and work to the right. Remove speaker screws and the three screws in the recessed plastic spaces behind. Remove the square covers behind the handle and in the arm rest. Remove the 2 philips screws exposed. Start to pry from the top hinge side between the plastic door panel and the metal door. Work your way around the door until plastic clips release. Once the bottom of the panel and sides are free, lift the panel up and off the door being careful not to pull wiring and door handle mechanism loose. Unplug the as much of the wiring as you can and support the panel so as to not stretch the wiring. Pop the plastic retaining clip on the door handle connecting rod and lift the rod out of the handle. Slowly peel back the vinyl/rubber door cover stuck to the metal door. The window is held in the lower track with two clips that are bolted to the track. Unbolt by raising or lowering the window and using a 10MM socket on the nuts to loosen. Remove the window seal along trhe bottom of the window opening by prying straight up. You can then remove the window and re-epoxy in the lower clips and reassemble window in reverse order.

Mar 08, 2009 | 1998 Plymouth Breeze

Not finding what you are looking for?
1993 BMW 5 Series Logo

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Frankie B

Level 2 Expert

65 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...