The exhaust camshaft has 3 timing marks on it, which one should you use to line it up with the inlet camshaft? thanks
SOURCE: SETTING TIMING ON 2000 NORTHSTAR ENGINE
Setting the camshaft timing isnecessary whenever the camshaft drive system has been disturbed,meaning the relationship between any chain and sprocket has been lost.Correct timing exists when the crankshaft and intermediate shaftsprocket timing marks are in alignment and all 4 camshaft drive pinsare perpendicular (90 degrees) to the cylinder head surface.
degrees) to the cylinder head surface.
I hope this helps, if not let me know
SOURCE: HELP!!!!need timing marks for pajero 94 2.8 auto *** import
there is a little mark on the crankshaft which you line up with the 'o' mark on the casing ..
remove the cam cover and look at the cam you should see a nob on the cam about 3 th lob and that should be facing just left of the engine ..
if you have a turbo there is two notchs on the injection pump pully ..if turbo there is a 't' mark on the rear of the cover the notch on the pully should mark up with the 't'..
the timing is set..
SOURCE: TIMING MARKS CAMBELT REPLACEMENT FOR CL-T CHARADE, PLEASE
Hi Cas,
1) timing belt - see the small dot on tooted crank (small) pulley and match this with a notch ^ on engine body. Align the 'F' on overhead camshaft front pulley with lower crank shaft (small pullet). You should also alight the top pulley with a ^ on right side of big pulley when facing engine from front
In case of diesel pump:
2) cam belt - alight the dot mark on small camshaft pulley with notch ^ on tappet cover. Move and hold pump pulley and alight it with dot on this pulley to dot mark on plate to which pump is bolted.
Regards,
Gulfraz, Karachi, Pakistan
SOURCE: isuzu trooper 2002 RLV engine. camshaft timing
Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.
Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2002/make/isuzu/model/trooper/2002_isuzu_trooper_timing_belt_diagram_marks.htm
1,251 views
Usually answered in minutes!
×