Question about 2006 Chevrolet Cobalt

1 Answer

Removing passenger door panel on chevy cobalt

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove and replace an outside door handle on a 2006 Chevy colbalt?


the following quote is taken from the web site from a chevy cobalt forum. if you have any more questions they might be able to help you directly.
(all it is is 2 bolts. Just take off your door panel and pull back the protective plastic and look for 2 bolts that line up with the door handle.)

How Do You Replace The Outside Door Handle Chevy Cobalt Forum Cobalt...

Jan 30, 2015 | 2006 Chevrolet Cobalt

2 Answers

How to get passenger door open on 2006 chevy cobalt with seat belt stuck in door?


This is going to sound a little odd, but properly jack the car and then try opening this door. Put the jack in the recommended jacking spot on the passenger side.

Imagine that the back and front ends of the car are compressing the center of the car. By lifting one end or the other, the center may shift. Otherwise you do not have a frame, but the engine cradle may have a support located closer to the center of the vehicle. Do not jack the sheet metal, but you may catch the cradle and apply lift there.

You may notice by putting in a piece of cardboard in the doorjam on whether there is an increasing gap as you jack the car.

Apr 07, 2012 | 2006 Chevrolet Cobalt

1 Answer

I have a 2010 chevy cobalt. Both of the power windows on the driver side quit working at the same time. The windows on the passenger side will work from the switch on the driver side and/or the passenger...


Window fuse's and relay's may be up under passenger side dash or behind glove box.
Drivers door window gets used the most so it could be the motor, window switch, relay or fuse.
Could also be a broken wire in the rubber boot going from the door to the body. You will have to eliminate each till you find the culprit.
The motor and the relay are the most likely to cause this problem. Try swapping the relay with a working window relay. If it still doesn't work, remove the door panel and remove the window motor.
Turn the motor shaft in both directions by hand several turns. Then plug the motor in and see if the switch will now run the motor. Sometimes thats all it takes to get it working again. I have had to do this with brand new motors. If voltage is not present at the motor connector, either a bad switch or a broken wire exsists. Make sure to check for voltage coming to that windows switch. Actually, GM use's a circuit breaker type relay for each window and one fuse for all the circuit breakers.

Aug 02, 2011 | 2005 Chevrolet Cobalt

6 Answers

2008 Cobalt - Front speakers not working and no audible turn signal. Both stopped working at the same time.


In my 2008 Cobalt, the front speaker in the driver door went inoperative - no turn signal noise, no warning chimes for door open with key in, seatbelt chime, low fuel chime, and of course, no music. All of those sounds come through the speaker. I switched the driver door speaker and the passenger door speaker, and now I have all of those noises back.

If you have manual roll down windows, you'll have to buy a special tool to remove a little clip that's behind the roller handle. This tool was included in a kit for about $7 that I bought at Harbor Frieght, but you might be able to find the kit at other auto parts stores. Google "removing window crank" and you should be able to locate a video that shows how to get it off.

Anyway, I switched the speakers and now we just don't have music coming out of the passenger door speaker, but at least we have all of the warning chimes and turn signal clicking noise again.

The dealer wanted almost $200 for a new speaker and to replace it (labor). Rediculous.

Jul 20, 2010 | 2008 Chevrolet Cobalt

1 Answer

2006 Chevy cobalt The passenger door will not open no matter what I do. I was trying to unlock it and a guy was trying to open at the same time ..now it will not open at all???


mcdevito75 here, Sounds like the linkage inside the door fell off and is not operateing the lock release. Bring the car to a repair shop that fixes Glass, Locks they should be able to open the door with a special tool then remove the inside panel to check all the linkages.

Jun 17, 2010 | 2006 Chevrolet Cobalt

1 Answer

Passenger door removal for radio speaker access.


YOU NEED A DOOR PANEL FLAT TOOL AND WINDOW CRANK CLIP TOOL IF YOU DONT HAVE POWER WINDOWS. A HAYNES REPAIR MANUAL TO SHOW YOU HOW TO REMOVE DOOR PANEL.

Apr 04, 2010 | 2007 Chevrolet Cobalt Coupe

1 Answer

I need instruction on replacing the passenger side mirror on a 2008 chevrolet cobalt


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Sep 24, 2009 | 2008 Chevrolet Cobalt

3 Answers

How to clean out the condensation tray in a 2005 Chevy Cobalt -


Find the end of the condensate drain tube under the vehicle (passenger side) and clean/blow it out -- it's clogged.

Charlie

Aug 25, 2009 | 2005 Chevrolet Cobalt

2 Answers

I need to remove door panel on 2008 Cobalt


Here's a How To video that will show you how to remove the door panel from a 05-10 Chevy Cobalt.

Hope this helps out,
1aauto.com

Dec 02, 2008 | 2006 Chevrolet Cobalt

2 Answers

How to get the window crank off on 2dr 06 cobalt


there is a clip behind the handle. you should see something like a big plastic washer between handle and panel, the clip is between this washer and handle use a pick to get clip off

Nov 25, 2008 | 2006 Chevrolet Cobalt

Not finding what you are looking for?
2006 Chevrolet Cobalt Logo

1,175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...