Question about 1995 Mercury Villager

1 Answer

My car won't start...I have checked my relay switch replaced my starter, it won't engage the starter at all. When I turn the key nothing happens.

Posted by on

  • gerry bissi May 11, 2010

    http://groups.yahoo.com/group/villagerqu... go here for villager help

  • TheComforter
    TheComforter May 11, 2010

    Ok, You'll have to be more specific.. Does the light come on the dash? Did you check the starter relay ? If you have no power to Dash it's the Main Relay. If you have power to dash then contact me back @ Scarfacefearsme@aol.com and I will tell you how to find the problem

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Move the ground wire from the battery on to the engine block or the transmisson housing this worked for me

Posted on Jul 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starter engaged while driving would not disengage. I turned key off put a new starter on now have lights power but nothing happens when turn the key whats going on? please, someone, tell me something.


Bad ignition switch. I have seen lots of these go bad. Also check starter relay. What happened was for some reason the starter relay was activated and sent a signal to the starter to start the car even though the car was running

Jun 09, 2017 | Cars & Trucks

2 Answers

Car will not start, its not battery, I was told its a fuse, need diagram of fuses to which one affects starting car


Car will not start how ? A crank- no - start or a no crank - no - start < meaning when you turn the key to the start position does anything happen ? Starter engages an spins the engine an doesn't start an run ! Or when you turn the key to start the position nothing happens ? Who told you it was a fuse ? Are there any light's lit on the instrument cluster , SECURITY ? If Nothing happens Find the starter relay an jump pin's 30 & 87 , if nothing is wrong with starter , battery , battery cables it should spin the engine . Is your vehicle automatic transmission or stick ? Automatic has a neutral safety switch , won't let vehicle engine spin unless in park or neutral . Manual has clutch switch , won't let starter engage unless the clutch pedal is pressed . Both of these switches can go bad . There are videos on youtube on basic electrical trouble shooting . Also on testing starter circuit . How to voltage drop test starter motor circuit

Nov 13, 2016 | 1996 Dodge Neon

1 Answer

Car won't engage starter


At the starter relay, you have two red or purple wires, one goes to the starter and the other comes from a 30amp fuseable link. Is that fuseable link circuit hot ?
From the key switch, power goes thru the alarm relay, then the clutch safety switch or automatic selector switch, then to the starter relay. The fourth wire on the starter relay is a ground.
You should be able to put power to the starter relay on the white or yellow wire coming from the safety switch to make the relay engage.
My guess is something wrong with the alarm system.

Mar 02, 2014 | 2004 Hyundai Tiburon

2 Answers

I have a 92 sentra lights come on but when i turn key nothing happens. Starter good ,relay good, head lights don't dim when you turn key . Car won't turn over at all


If by lights, you mean the dash lights come on, then ignition switch must be getting power. If dash is not working with key on, check the 30 amp fuse link which powers the ignition switch.
If switch is good and starter is good, the start wire from switch goes to, if automatic, to inhibitor relay (the park/neutral function) and then to starter. There is also an inhibitor switch on the shifter or on the transaxle that turns on the inhibitor relay when key is on and shifter in park or neutral. The inhibitor switch is powered by a 10 amp fuse D.
If you have a manual transmission, the start wire from ignition switch goes to the clutch interlock relay and then to the starter. This relay is turned on by the clutch interlock switch on the clutch pedal.
You can check for power on either relay, the inhibitor relay or the clutch interlock relay, with a test light. Pull the relay out, have the key held in start position. Now both relays would have power showing on two terminals where the relay plugs in. If inhibitor relay only has power on one terminal or no power at all, either ignition switch is not sending power or fuse D is out or the inhibitor switch is not working right. If clutch interlock switch does not have power on two terminals either the ignition switch is not sending power or the clutch interlock switch is bad.
If the relay checks are good, check for power on the small wire to starter with key held in start. If you have power there, the starter solenoid must be out.

May 08, 2013 | Cars & Trucks

2 Answers

Won't start


How about corroded battery cables (internal)

Fusible Link wiring corroded & open circuit,does
everything electrical work except the starting circuit?

Turn key & have power to starter solenoid ?
Neutral Switch !
Ignition Switch !

Tough to guess without wiring diagrams,
to see where to start testing

Can't fix what you don't know you have

Oct 02, 2012 | 1990 Ford F150

1 Answer

Dodge Grand Caravan won't start. Replaced ignition and starter tested fine but when I turn key and nothing happens


Check the neutral safety switch on the transmission. It should have three wires on the connector (if I remember correctly). There should be power on the Brown with yellow wire with the key in the crank position. If there is ground that wire and see if the van starts. If it does replace the switch. If it does not check the starter relay. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Jan 29, 2012 | 1993 Dodge Grand Caravan

1 Answer

Truck usually starts and runs fine but sometimes when I turn on the key absoulutelly nothing happens


nothing as no lights radiocheck ignition switch or nothing as in starter check relay and power at solenoid on starter when switch is in start position no power check relay have power replace starter

Jan 10, 2011 | Mitsubishi Mighty Max Cars & Trucks

Not finding what you are looking for?
1995 Mercury Villager Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5522 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...