How do i replace front drivers side brake caliper?
Jack the van up, remove the tire. Then you will see the caliper. There will be 2 bolts that hold it on to the rotor. Remove the bolts and pry it off with a screw driver or what ever works. Then disconnect the break line from the caliper. After you get the new one use a c-clamp to press the piston down into the caliper and install the brake pads. Bolt the caliper back into place and install the line. Loosen up the bleed valve on the caliper 1/2 turn and have someone pump the breaks until no air bubbles come out. Once you have a smooth stream of brake fluid coming out the valve have that person pump once more and hold the pedal all the way to the floor. Then tighten the valve.
×