Question about 1999 Honda CR-V

1 Answer

Noise in drivers side door 1999 Honda CRV

Noise associated with door locking. Can't get the panel off to check the source of the noise. Anyone know how to get the panel off?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 112 Answers

Assuming the door will open, look for screws in the grip openings in the armrests (some may be concealed behind plastic plugs which your carefully pry out.

The bulk of the panell attachment is by means of plastic mushrooms which snap into sockets in the body of the door. These mushrooms remain attached to the door panell.

There will also be actuator rods clipped to the interior release and lock, carefully unclip these while minding their position for reassembly.

Your are likely facing replacement of a lock servo

Posted on Jun 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Crv master door lock switch


In my Honda, with the door ooen I can pull the inside handle, hold it, and hit the lock switch and it will lock all doors including the drivers door.

May 09, 2017 | 1999 Honda CR-V

1 Answer

Electrical-check engine light blinking & door lock, lock/unlocks


first unhook the battery for 15seconds and hook it up......if that dnt work jus say somthing i pretty sure i can help u figure this out

Mar 28, 2010 | 1999 Subaru Forester

3 Answers

On my 2003 Honda CRV Sport, When I lock me steering I get a grinding noise, does anyone what this is? Cheers Alan


if the noise only occurs at full lock then it is the pump clutch slipping which is normal.sounds awful but okay.

Mar 12, 2010 | 2003 Honda CR-V

1 Answer

My 2003 Honda CRV ...drivers side door does not lock with fob. All other doors lock. When I lock the drivers side door with the key, it won't unlock with the fob.


you may need to replace the door locking actuator, they do tend to go bad over times. does the driver side door lock automatic when using the lock button on the driver side. if you can lock and unlock the driver side door with a switch, my guess would not be the locking actuator, it might be in the remote locking module.

Sep 30, 2009 | 2003 Honda Civic

1 Answer

Crv noise on full lock


The most likely cause for this is worn CV joints. The CV or constant velocity joints on your driveshafts will emit a clicking type of noise when the steering is turned to full lock. If this is describing what you are hearing it is a classic symtom of CV trouble.

Otherwise noise when applyiing brakes or shifting gear is usually associated with worn ball joints or steering/lower/upper arm linkages.

Hope this helps. Please remember to rate my answer. Thanks.

Jul 06, 2009 | 2005 Honda CR-V

3 Answers

1999 Honda CRV automatic door lock only works for three doors


the little motor that operates it inside the door is probably frozen, so it will need to be replaced!!

Jun 19, 2009 | 1999 Honda CR-V

1 Answer

Front end loud noise like an old bed clunk, honda crv 2000


its probably your sway bar end links, I had the same problem, I replaced both sides and the bushings and no more clunk noise

Apr 26, 2009 | Honda CR-V Cars & Trucks

3 Answers

Door Lock Problem


it sounds like the door lock actuator at the latch is worn out.

Jun 24, 2008 | 2001 Honda CR-V

Not finding what you are looking for?
1999 Honda CR-V Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...