Question about 2003 Chrysler Sebring

1 Answer

2003 chrysler sebring xl auto transmission locked in low gear

When I was taking off my trans shift slowly in to gear. i live on a side street to the highway so i gave it gas to get up speed and it seem to pop out of gear i let off the gas to let it go back into gear but after that it didnt shift right. I stoped at a red light then took off up a small grade and it would'nt stay in gear so i pulled over and put it in low gear and that what it stays in now . the trans has a whinning noise now ? i have the reverse gear and low gear.
i also had to drive back home in low at the speed of 45 mph which was 5000 rpms.it stayed in low gear fot the 11 miles home. what could be my problem ?

Posted by on

  • Richard Scordino May 11, 2010

    Trans is slipping and needs rebuild.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 15 Answers

It is the problem

Posted on Apr 09, 2017

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 11 Answers

SOURCE: 01 Chrysler T&C Transmission Problem 3.3L engine

try having the transmission module re-flashed.

Posted on Mar 14, 2009

  • 1 Answer

SOURCE: I have a 2003 chrysler sebring xl sedan 4 dr. 2.4

have not found the problem yet ---still looking --thanks

Posted on Jun 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 01 chrysler sebring wont shift into any gears


Check that the shift linkage is connected at the trans, if it is, put some transmission fluid in it after checking the dipstick while running in neutral with brake on.

Oct 12, 2014 | 2001 Chrysler Sebring

1 Answer

How do i check to see if the neutral safety switch is bad. 2004 Chrysler sebring GTC


Most safety switches are a black module located on the side of the transmission, where it shifts into gear.

May 19, 2014 | 2003 Chrysler Sebring

1 Answer

95 Chrysler Sebring transmission shifts to 2nd gear only


I don't want to jump ahead with bad news, before
you have a trans shop road test & weigh in

But having owned a trans shop & worked on those year
chryslers in the 1990's

I think your going to be rebuilding it

Mar 09, 2013 | Cars & Trucks

1 Answer

My 2002 pt cruiser won't shift out of low.


the 2nd & 3rd gear solenoid needs replacing. It is mounted by the trans filter inside the trans pan

Jul 27, 2010 | 2002 Chrysler PT Cruiser

1 Answer

2004 chrysler sebring AT Trans prob


have electronic transmission module checked

Sep 08, 2009 | 2004 Chrysler Sebring

2 Answers

2001 Chrysler Sebring does not shift. I can put it in reverse and drive and it runs, but it does not shift out of first gear. Speedometer still works. Transmission fluid shows that levels are fine.


might be a pluged filter in the transmission check that and it could not hurt to take it to a transmission shop to have them run a trouble code on the tranny

Aug 31, 2009 | 2001 Chrysler Sebring

2 Answers

1999 chrysler sebring, transmission doesnt shift


find out why the light is on and fix it. This will most likely be a trans wiring issue that the light is on for.

Jul 11, 2009 | 2004 Chrysler Sebring

1 Answer

Chrysler lhs 3.5 engine


It sounds like it is in limp mode. This is to protect further damage to transmission. You need to take it to a trans shop for diagnostic

Dec 17, 2008 | 1995 Chrysler LHS

3 Answers

2003 BUICK REGAL TRANSMISSION PROBLEM.


This is a common problem on some GM cars. There is a pressure control valve in the side cover of the transmission that needs to be replaced. The transmission does not have to be rebuilt. You will need to get a side cover gasket also.

Nov 10, 2008 | 2003 Buick Regal

Not finding what you are looking for?
2003 Chrysler Sebring Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...