Question about 2000 Dodge Intrepid

2 Answers

I have a 2000 Dodge Intrepid 2.7L DOHC Engine - Climate Control

I have a 2000 Dodge Intrepid 2.7L DOHC and have been told that I need a new climate control at the price of $800.00. Here's the problem. Air is not blowing from the inside vent, just the floor and window vents. When control is turned to recycled air (hot air blows from the operating vents - window and floor). When the control knob is turned to outside air top vent, a/c blows from the operating vents - window and floor. It's hot and I need reliable air, but with just having replaced the struts, shocks, inside and outside tire rods, I can't afford it. Please help! Thank you.

Posted by on

  • 2 more comments 
  • havely_princ Jun 16, 2009

    Thank you so much for your assistance. I'll check ebay for the climate control system as suggested. If this doesn't correct the problem, is there another suggestion?

  • havely_princ Jun 16, 2009

    Yes, it blows cold air from the floor and window vents, but not from the front vents. Also when I place the knob to the area where the air is directed to blow, it still blows from the window and floor vents only.

  • havely_princ Jun 16, 2009

    I have to turn the knobs, but I have to press the "snowflake" for the a/c.

  • havely_princ Jun 16, 2009

    Thanks! I'll have that looked at first. You're an angel!

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

Might be the same....You may want to do the diagnosis proceedure. Alot of times its the door actuators. Servos in replace of old cable design. Usually it will be a code 46. DOOR BLEND ACTUATOR SHORT TO BATTERY.
The DTC's can be checked with the MTC control and the Odometer Display of the Mechanical Instrument Cluster if a DRBIII® scan tool is not available. The MTC control can only be placed into the diagnostic mode while the engine is running and the vehicle is not moving. To place the system into it's diagnostic mode, adjust the MTC control to the following settings:

  1. The engine must be running with vehicle not moving.
  2. The fan speed set to any speed except OFF.
  3. The temperature control knob in full cold (full counterclockwise position).
  4. The mode control knob must be placed in Defrost position (full clockwise position).
  5. The A/C button can be On or Off.
  6. Press and hold the rear window defogger (EBL) button until the mechanical instrument cluster odometer display indicates an "AC00". The BCM will chime once and the MTC A/C button LED will begin blinking.
  7. Release the EBL button and wait until the MTC A/C button LED stops blinking. This means that the error check and climate control door calibration is complete. NOTE: It is important that no other control knob or button is pushed until all DTC's are read. Pushing any button except the A/C button or turning a control knob will end the diagnostic test without showing the rest of the DTC's. There also may be other DTC's stored in the BCM not related to the climate control system. These DTC's can only be found using the DRBIII® scan tool.
    DTC's related to the MTC control head will appear on the odometer display in numerical form after the letters "AC". The odometer display will return to normal operation if no DTC's are found. If a problem is found, then the odometer will display the letters "A/C" followed by the DTC number. The odometer display can only show one DTC at a time. Under certain circumstances, more than one DTC could be in the memory. To scroll through any additional DTC's, press the A/C button on the MTC control. The BCM will beep each time the A/C button is pushed. Continue pushing the A/C button and recording the DTC's until the odometer returns to normal operation (note the letters AC will dissapear.

Posted on Aug 16, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 157 Answers

I believe this is the part you are looking for: http://cgi.ebay.com/ebaymotors/00-01-02-03-04-DODGE-INTREPID-AUTO-AC-CLIMATE-CONTROL_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q7c39Q3a1Q7c72Q3a1205Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem53db302cc2QQitemZ360159653058QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories if its gone you can search ebay for the climate control system. installation could cost a bit though. there is also a small chance it will not correct the problem.

Posted on Jun 16, 2009

  • 1 more comment 
  • Caleb Judd Jun 16, 2009

    I may have slightly misread your post. so your saying that whatever the control is set to it only blows hot air out of the floor and side window vents? in which case it could be the mechanical operation mechanism inside the dash which controls where the air goes.
    Does the air ever blow cold?

  • Caleb Judd Jun 16, 2009

    In that case it may not be the climate control module. It is electric and automatic right? push buttons as opposed to knobs your turn or move?

  • Caleb Judd Jun 16, 2009

    A new Climate control unit may not fix your problem then. Behind the unit you have a cable linked to the control arms which control where the air flows, this cable is probably disconnected at the other end if theres still pressure on the knob/run which changes where the air comes out. if there is little or no pressure on it then it may be just behind the unit.

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22246 Answers

SOURCE: passenger side blows hot air when front control set to Air

you cant adjust it ,this requires the dealers computer to re set it,or a phyiscal control has packed up like a vacumn pipe has split where it pushes onto the valve that controls the flap in the heater unit.

Posted on Apr 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 dodge intrepid auto climate control. My heater will not turn off, and the fan is stuck on high, and also stuck on the cold temp. I replaced the climate control module and checked all the wiring....


the fan speed control not adjusting usually means the 'resister' is no longer working. Stuck on cold means the 'blend door actuator' is no longer functioning.

Dec 10, 2013 | 1998 Dodge Caravan

1 Answer

How do i remove the section of dash around the control head...(climate control unit) in order to put in my new control unit in 1999 dodge intrepid


PULL YOUR CONTROL SECTION FROM INSIDE THE DASH. THE PLASTIC WILL COME OUT WITH A COUPLE OF CLIPS AROUND IT
PLS VOTE!!

Sep 24, 2011 | 1999 Dodge Intrepid

1 Answer

I have a 2000 pontiac grand prix with a digital climate control system. The heat quit working, it doesn't blow out any heat. Now that it is warm outside the air stopped blowing out any air. The digital...


I have a 2000 pontiac grand prix with a digital climate control system. The heat quit working, it doesn't blow out any heat. Now that it is warm outside the air stopped blowing out any air. The digital temperature on the climate control is not correct. When it states that it is below 30 degrees on the ext and it is warm outside the air wont be cold. Once it starts going above 30 degrees the air gets colder. Today the blower stop working all together. Was told it maybe the climate control unit was bad. You can hear the door opening/shutting when you switch the temp from cold to hot. But there was no heat blowing out whatsoever in the winter time. Could you please give me your opinion on whether or not it is the climate control unit or something else?

Jul 11, 2011 | 2000 Pontiac Grand Prix

2 Answers

NECESITO, VER COMO VA LA CADENA DEL TIEMPO DE INTREPID 2.7 2000


2000 Dodge Intrepid 2.7L SFI DOHC 6cyl

zjlimited_44.jpg

Fig. After the timing chain is installed, the timing marks should be aligned-2.7L engine (click for zoom)

Espero que esto le ayude. Suerte, y recuerde calificar esta respuesta.

Nov 09, 2010 | 2000 Dodge Intrepid

1 Answer

A/c blower with electronic climate control


It way be a bad or dirty climate control sensor.

Apr 11, 2010 | 1999 Dodge Intrepid

1 Answer

My 1999 intrepid climate control only blows through the dash


SOUNDS LIKE YOU HAVE A VENT THAT IS STUCK AND WONT SWITCH TO VENT AND FLOOR VENT

Mar 01, 2010 | 1999 Dodge Intrepid

1 Answer

Climate Control Problem


I had the same problem. Push the top right corner of the panel surrounding the LED display hard and see if it works again. If it does, disassemble and the reassemble the panel and it should be working again. It worked for me. I hope this helps.

Jun 04, 2009 | 1999 Dodge Intrepid

1 Answer

Climate control blowing at max speed with no control


you need to replace the blower motor regulator.

Jan 19, 2009 | 1996 Dodge Intrepid

Not finding what you are looking for?
2000 Dodge Intrepid Logo

1,275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...