Question about 2005 Saturn Relay
Posted by Anonymous on
Are you kidding me? Very simple, remove battery cables and clamps. Comes right out.
Posted on Oct 03, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 04, 2017 | Cars & Trucks
Jul 12, 2013 | 2012 Jeep Grand Cherokee
Google found this:
it is behind the front passenger wheel fender
The battery is buried within the front section of the passenger side front fender.
Disconnect the neg battery cable close to the firewall.
Remove the bolts holding the air cleaner assembly in place.
(Removing the air feed tube from the air cleaner assembly helps)
Once this is removed, you should be able to see the battery hold-down bolts.
Remove these and remove the hold-down assembly.
If you are removing the battery, remove the 1st battery cable.
Depending upon what battery you have, you may be able to slide the battery back toward the wheel and disconnect the 2nd cable.
Jack the vehicle up, put on jack stands and remove the passenger side wheel.
On the front side of the wheel well there is an access panel that needs to be removed in order to access the battery. There are 6-8 1/4" screws to remove. Then manipulate the cover until you can remove it, bending it slightly.
If you were unable to disconnect the 2nd battery cable earlier, you can now move the battery further towards the rear of the car. Remove the 2nd cable clamp from under the hood.
Slide the battery all the way out. It is heavy!
Reverse the instructions for reassembly.
Hope this helps.....
Read more: http://wiki.answers.com/Q/Where_is_the_battery_on_a_1998-2004_Chrysler_Concorde#ixzz28j7Sd3O0
Oct 08, 2012 | Chrysler Cars & Trucks
Dec 14, 2011 | 2002 Land Rover Freelander
Sep 25, 2011 | 2001 Toyota Camry
Remove the negative battery and place it out of the way then remove the positive cable and move it as well.Remove the heat guard or shield which surrounds the battery if installed.Remove the battery hold down wedge by unscrewing the bolt.Lift out the battery.Reverse for installation.--------------- Thank you.
Jan 31, 2011 | 2006 Dodge Durango
Aug 17, 2010 | 2002 Chrysler Concorde
Apr 13, 2010 | 2003 Chrysler Concorde
Oct 15, 2009 | 2006 Pontiac Solstice
Oct 18, 2008 | 2003 Chrysler Concorde
21 people viewed this question
Usually answered in minutes!