Question about 2004 GMC Savana Cargo

Open Question

Gmc 2500 van reverse lights

Reverse lights don't work

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 3600 Answers

SOURCE: I have a GMC 2000 2500, the passenger rear

Try the wireing harness on the driver side rear to the passenger side you may have some wires caroded also it could be shorted out pig tails. If this helped you please rate this free question and if you need more help post here and thanks for using for Fix-ya.com

Posted on Aug 20, 2009

Testimonial: "There was no corrosion, your answer lead me to taking the left side panel and plugging into the right side which worked.I replaced the panel,now fixed"

Ad
emissionwiz
  • 80417 Answers

SOURCE: Security light is blinking - GMC 2500 van won't start

replace the ignition lock cylinder, that should cure the problem, but u will need to have the VATS module re-programmed to accept the new VATS key resistance value, this is preformed by the dealer only.

Posted on Sep 14, 2009

Testimonial: "Thanks so much... This has been drivng me nuts>>>"

wracefans24
  • 1985 Answers

SOURCE: Check engine light on, code P2761

P2761=Torque Converter Clutch Pressure Control Solenoid Control Circuit/Open

Posted on Dec 18, 2009

bluebirdmate
  • 1190 Answers

SOURCE: airbag light is constantly on...is

Hello:If the air bag light is on that means there is a problem with the system. to find out what is causing the light to be on you will have to have it checked with a scanner. You can check with auto zone or advance auto but I don't think the scanners they use will check the air bag system. There isn't any reset for the system. To put the light out you have to repair the problem then clear the code.

Posted on Feb 22, 2011

  • 4977 Answers

SOURCE: tail lights not working. fuses

do the front marker/park lights work if not you could have a bad light switch on the tail light side of the switch.you need to check the brown wire at the back of the truck in the wiring harness as this is the tail light wire that feeds the bulbs.if you have power there then you will have to check for power at the socket,if no power at the socket but were you check the wire then there is a problem between the two that you will have to check out.if there is no power when checking the wire then you will have to check for lose of power between the switch and rear wiring.make sure the fuse is good by using a test light and not by looking as sometimes they look good but don`t work.

Posted on Jul 11, 2011

Testimonial: "Thanks a million!!! problem solved, just a simple loose connection at switched saved me $$$$ from taking it to the shop. thanks for the info!!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 1997 chevy c1500. The brake lights work. The reverse lights don't work. I replaced the bulbs, not the problem. I checked the fuse, not the problem. What else can I do to fix this problem??


Do you have power coming out of the reverse circuit on the neutral safety switch ? Or the reverse switch if the truck has a manual trans ?

Jan 28, 2013 | Cars & Trucks

1 Answer

Reverse lights don't work


Sounds like a wiring problem. Try checking the fuses at your own risk.

Nov 13, 2012 | 2004 Ford Explorer

1 Answer

My reverse lights don't work on my 2000 323CI 5 speed BMW when in gear


The fuse holder contains 10A fuse F27 which supplies power to the reversing light switch. When you shift into reverse with the engine running, the switch closes and the back up lights turn on. If the fuse is OK, you may have a defective switch

Oct 17, 2012 | BMW Cars & Trucks

1 Answer

Reverse lights don't work


Find the fusebox and replace the fuse for the reverse lights.

May 14, 2012 | 2000 Dodge Durango

1 Answer

My 97 Mazda mpv van reverse light does not come on when in reverse


Hi Kauhanebk, First thing to do is check the bulbs. If they are both okay check the fuse. After doing that if they still don't work look for broken cables and open circuits. If still no results check the reverse light switch. If it needs replacement, be very observant when removing it as there may be a ball bearing inside the housing to give the extra reach needed for operation. Regards John

Feb 16, 2012 | Cars & Trucks

1 Answer

Reversing lights & bleeper not working on 2005


Sounds like a fuse blew or the reverse switch is bad or MISADJUSTED? don-ohio

Sep 05, 2011 | Ford Transit Connect Cars & Trucks

Not finding what you are looking for?

Open Questions:

2004 GMC Savana Cargo Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...