If I reset again it will only allow one function and then stop working again.
SOURCE: mercedes c220 ignition key stopped working
Hi! Sounds like the key needs to be coded again, take all relvant details i.e. chassis vin number, Registration document (Title) and key to your local Mercedes Dealership and hopefully they'll rec-code it for youor replace it.
Good Luck and a Happy New Year to You and your family.
Remember the blue FixYa button?
Paul 'W'
SOURCE: mercedes 1999 c200 key fob
Hello Haq!
Could it be the key just needs re-coding? maybe you are worrying to much as £177 would be about right as that would need coding etc., Try phoning your local Merc dealer or take the key and V5 to them for coding (Hopefully)
Good Luck!
Paul 'W'
Onyer~EDson(:0)~[><
SOURCE: mercedes key fob wont lock the doors.might have a
Hi, it’s pretty difficult to
lose a part of the circuit as you describe. So assuming that you have placed
new fresh batteries correctly in the key – making sure that the polarity is
correct! (easy to get wrong!) the key will need to be synchronised to the cars ignition
/ management system. You don’t say which model or year your Merc is, but most
have a similar way of re – synchronising the Key to the car. It’s pretty easy
and you lose nothing by trying it anyway.
Synchronising the locking system
If the vehicle
cannot be locked or unlocked, first check the remote control unit batteries
(see below). If the battery charge indicator lamp lights up, this means the
system needs to be synchronised.
To do this, direct
the remote control unit at the car and briefly press the Lock or Unlock button
twice. Within approximately 30 seconds, put the key in the ignition lock and
turn the key to position 2. The locking system should now be operative.
Battery Check
Press either the
Lock or Unlock button and hold for longer than one second. The light on the key
lights up briefly if the battery is OK. if it does not light up, replace the
batteries immediately. Mercedes will charge a small fortune for these, so try
elsewhere, they are pretty common and will cost substantially less.
If re –
synchronising the Key fails to solve the problem, check that the Central
locking fuse in the cars main fuse box is OK.
Hope this solves the
problem – Let me know? Good luck!
SOURCE: have mercedes E class key fob will not open doors,
If key will not turn
Car battery flat,charge or jump to activate elec ignition
SOURCE: how to reset airbag for mercedes benz c220 1994
This can not be reset by conventional methods. This must be done through a scan tool. Usually only the dealer scan tool will communicate with the SRS module. If the SRS light is on you have other issues and they must be remedied before the light will go out. There is no way of knowing what the issue is without running codes with the scan tool.
Reset your Mercedes-Benz key by placing the key in the ignition of your vehicle while the vehicle is turned off. Do not turn on the vehicle. Press a finger on the "lock" button of your key fob while the key is in the Mercedes' ignition.
Pull the key out of the ignition while continuing to hold the "lock" button down. Continue to hold the "lock" button for the duration of the key resetting process
Use another finger to push down on the "unlock" button five consecutive times. Keep holding down the "lock" button.
Release the "lock" button. This is the end of the resetting process for your Mercedes-Benz. Use your key fob to ensure it is properly working
179 views
Usually answered in minutes!
×