Question about 2007 Ford Mondeo 1.8
I cannot locate which fuse it is from the manual
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The switch is on the gearbox, But not sure of the exact location for your model. But guess there are not many other wired items on the gearbox.
Posted on Jul 11, 2008
SOURCE: mondeo tdci
hi there, you will need a diagnostic check carried out to locate the exact fault, most garages have the equipment to carry out these checks so you won't need to visit your ford agent, a common fault on the engines is the camshaft sensor these cost around £20 and are very easy to replace, however once you have it tested you will now your exact fault, hope this helps
Posted on Oct 24, 2008
SOURCE: grey smoke from my ford
hi from uk if you have to turn engine a little longer than normally? on initial start fro cold? and then starts/runs ok for rest of day ? then more than likely your engines glow plugs are in early stage of failing/burning out? these engines rely on pre heat of cylinders when starting especially from cold so they have glow plugs for this purpose indication of burning out is the grey smoke you report on cold starts this is fuel that is not being combusted due to poor cylinder compression/s being heated on first start but when engine heats up no problems so i suggest you renew all 4 glow plugs they are easy diy job and you can purchase from good motor stores not necessarily dealers they are just like spark plugs usually 10 mm socket/spanner to change em after disconnecting the elec supply cable from each hope this helps and inspires you? if milage is high then they are in need of renewal
Posted on Nov 09, 2008
SOURCE: fod mondeo cut out
ford only on the newer models ,software readers like scansoft or digisoft will not touch it if its a europeon model ,dont know about cars sold in america weither its the same coded software or not
Posted on Nov 17, 2008
SOURCE: ford mondeo bonnet lock
This is a very common fault on the fords, if i get one in, i generally soak it in WD40 then keep working it back and forward untill the mechanism releases.
If the lock is completely gone then ive had to go as far as breaking the grille off and opening it manually with a scrrewdriver, but this is last resort.
Posted on Feb 04, 2009
Tips for a great answer:
Mar 12, 2015 | 2005 Ford Mondeo
Feb 22, 2015 | Ford Mondeo Cars & Trucks
Dec 05, 2014 | 2007 Ford Mondeo 2.0
Mar 27, 2014 | 2007 Ford Mondeo 2.2
Nov 06, 2012 | 2003 Ford Mondeo
Nov 19, 2009 | 2005 Ford GT
Jan 21, 2009 | 2002 Ford SVT Focus
Oct 23, 2008 | 2000 Ford Focus
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: