Question about 2001 Audi A4

1 Answer

ALTERNATOR I HAVE 2 BOLTS OFF . DOES IT HAVE ANY MORE ?

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Audi Expert
  • 358 Answers

Believe there are three. If you call the local dealer with your vin# and ask nicely they may email you the ETKA diagram.

Posted on May 11, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change alternator 2005 chryler 300


This answer covers:
2005 Chrysler 300 6cyl VIN "G" 3.5L SFI HO (72% of 2005 300's)
2005 Chrysler 300 6cyl VIN "R" 2.7L MFI DOHC (28% of 2005 300's)
2005 Dodge Magnum 5.7L engine

Alternator

Removal & Installation


WARNING - Precautions Section:
Disconnect negative cable from battery before removing battery output wire (b+ wire) from alternator. Failure to do so can result in injury or damage to electrical system.

2.7L Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Disconnect negative battery cable.
  3. Remove alternator drive belt.
  4. Disconnect alternator field circuit plug.
  5. Remove B+ terminal nut and wire.
  6. Remove 2 lower mounting bolts.
  7. Remove alternator.
To install:
  1. Install alternator.
  2. Install upper bolt mounting bolt.
  3. Install 2 lower mounting bolts.
  4. Tighten bolts to 48 ft. lbs. (65 Nm).
  5. Install B+ terminal nut and wire. Tighten nut to 115 inch lbs. (13 Nm).
  6. Connect alternator field circuit plug.
  7. Install alternator drive belt.
  8. Connect negative battery cable.
3.5L Engines
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Disconnect negative battery cable.
  3. Remove alternator drive belt.
  4. Remove bracket bolts.
  5. Remove upper mounting bolt.
  6. Raise and support vehicle.
  7. Remove middle splash pan.
  8. Disconnect alternator field circuit plug.
  9. Remove B+ terminal nut and wire.
  10. Remove lower mounting bolts.
  11. Remove alternator.
To install:
  1. Install alternator.
  2. Install lower mounting bolts. Loosen install the upper mounting bolt.
  3. Tighten lower mounting bolts to 48 ft. lbs. (65 Nm).
  4. Connect alternator field circuit plug.
  5. Install B+ terminal nut and wire. Tighten nut to 115 inch lbs. (13 Nm).
  6. Install middle splash pan.
  7. Lower vehicle.
  8. Remove loose installed upper bolt.
  9. Install bracket and bracket bolt.
  10. Install upper mounting bolt and bracket.
  11. Tighten upper mounting bolt to 48 ft. lbs. (65 Nm).
  12. Tighten the bracket bolt to 40 ft. lbs. (54 Nm).
  13. Install alternator drive belt.
  14. Connect negative battery cable.
5.7L Engines
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Disconnect negative battery cable at battery.
  3. Remove alternator drive belt.
  4. Raise and support vehicle.
  5. Unsnap plastic insulator cap from B+ output terminal.
  6. Remove B+ terminal mounting nut at rear of alternator. Disconnect terminal from alternator.
  7. Disconnect field wire connector at rear of alternator by pushing on connector tab.
  8. Remove alternator support bracket nut and bolt. Remove support bracket. See Figure 1.
  9. Remove 2 alternator mounting bolts. See Figure 2.
  10. Remove alternator from vehicle.

Fig. 1 Alternator Support Bracket - 5.7L engine

7309257c-afe6-4c17-9422-d7fa2e3bd4b1.jpg

Fig. 2 Alternator Mounting Bolts - 5.7L engine

22b81ff7-7912-467f-9eaf-13ba2ff3a1a4.jpg

Oct 13, 2014 | 2005 Chrysler 300

1 Answer

How do replace alternator 06 f 250 6.0 l


I tried to find a tutorial video that could better show the process but I couldn't locate one in my database. Hopefully, my written instructions will suffice.

  1. Disconnect the negative battery cable.
  2. Rotate the drive belt tensioner away from the drive belt and remove the drive belt from the alternator pulley.
  3. Detach the electrical harness connectors at the alternator assembly.
  4. Disconnect the positive battery cable and remove the nut and washer.
  5. Remove 2 front alternator bolts.
  6. Remove the rear alternator support bracket retaining bolts and the support bracket.
  7. Remove the alternator from the vehicle.

To install:

  1. Place the alternator in position and loosely install 2 front alternator retaining bolts.
  2. Install the alternator bracket and 3 alternator bracket bolts. Tighten to 84 inch lbs. (10 Nm).
  3. Tighten 2 front alternator retaining bolts to 19 ft. lbs. (26 Nm).
  4. Connect 2 electrical harness connectors to the alternator assembly.
  5. Connect the positive battery cable and install the nut and washer. Tighten the nut to 72 inch lbs. (8 Nm).
  6. Rotate the drive belt tensioner away from the drive belt and install the drive belt on the alternator pulley.
  7. Connect the negative battery cable.
  8. Start the engine and check for proper charging system operation.

Jun 17, 2012 | 2008 Ford F 250 Super Duty 4WD

2 Answers

Where is the voltage regulator located?


The voltage regulator is built into the Alternator.

May 13, 2011 | 2003 Ford Expedition

1 Answer

How do you get the alternator out after all bolts have been removed from a 02 ford escape


There are 3 bolts

1 on the top
2 on the buttom on the pivot
once thats out push alternator foward to releave tension on belt
pull belt off

push the piviot bolt out from under the alternator (where the 2 bolts below connect on,, Its actually a pin.

lift alternator out!!

Apr 05, 2010 | Ford Escape Cars & Trucks

1 Answer

How to get the alternator off


1. Write down the code of your radio if it has anti-theft device.
2. Open the engine compartment.
3. Remove the negative terminal of the battery.
4. Remove the alternator electrical plug or connection.
5.Loosen the alternator 2-holding bolts, and lock bolt from the adjuster bracket.
6. Remove the alternator belt.
7. Remove the 2-holding bolts, plus the lock bolt adjuster, and take out the alternator.
8. Installation is reverse of removal. (make sure to charge the battery fully before re-installing new alternator-to avoid electrical malfunction).

Dec 09, 2009 | 1994 Toyota Corolla

1 Answer

Remove and replace alternator


2000 Ford Truck Expedition 4WD 4.6L EFI 8cyl

Alternator - REMOVAL & INSTALLATION

4.2L Engine

  1. Disconnect the negative battery cable.
  2. Disconnect 2 alternator and voltage regulator electrical harness connectors at the alternator. To disconnect push-on type terminals, depress the lock tab and pull straight off.
  3. Remove the positive battery cable nut and remove the positive battery cable at the alternator.
  4. Rotate the drive belt tensioner away from the drive belt and remove the drive belt from the alternator pulley.
  5. Remove 3 alternator retaining bolts and remove the alternator.
To install:
  1. Place the alternator on the engine and install 3 alternator retaining bolts. Tighten the bolts to 18-22 ft. lbs. (20-30 Nm).
  2. Rotate the drive belt tensioner away from the drive belt and install the drive belt on the alternator pulley.
  3. Connect 2 alternator and voltage regulator electrical harness connectors.
  4. Connect the positive battery cable to the alternator and install the nut and washer. Tighten the nut to 84 inch lbs. (10 Nm).
  5. Connect the negative battery cable.
  6. Start the engine and check for proper charging system operation.
4.6L, 5.4L and 6.8L Engines

f52fc60.jpg

Fig. 1 Detach the connectors from the alternator

ffe1937.jpg

Fig. 2 Remove the nut and the battery cable from the post on the rear of the alternator

6ce39ae.jpg

Fig. 3 Remove the 2 front alternator mounting bolts and ...

45a032e.jpg

Fig. 4 Remove the alternator from the engine by carefully lifting it up and...

6513790.jpg

Fig. 5 ... out of the engine compartment
  1. Disconnect the negative battery cable.
  2. Rotate the drive belt tensioner away from the drive belt and remove the drive belt from the alternator pulley.
  3. Detach the electrical harness connectors at the alternator assembly.
  4. Disconnect the positive battery cable and remove the nut and washer.
  5. Remove 2 front alternator bolts.
  6. Remove the rear alternator support bracket retaining bolts and the support bracket.
  7. Remove the alternator from the vehicle.
To install:
  1. Place the alternator in position and loosely install 2 front alternator retaining bolts.
  2. Install the alternator bracket and 3 alternator bracket bolts. Tighten to 84 inch lbs. (10 Nm).
  3. Tighten 2 front alternator retaining bolts to 19 ft. lbs. (26 Nm).
  4. Connect 2 electrical harness connectors to the alternator assembly.
  5. Connect the positive battery cable and install the nut and washer. Tighten the nut to 72 inch lbs. (8 Nm).
  6. Rotate the drive belt tensioner away from the drive belt and install the drive belt on the alternator pulley.
  7. Connect the negative battery cable.
  8. Start the engine and check for proper charging system operation.
5.8L and 7.5L Gasoline Engines and 7.3L Diesel Engine
  1. Disconnect the battery ground cable.
  2. Label and detach the connectors from the alternator.
  3. Release the tensioner and remove the drive belt from the alternator pulley.
  4. Remove the alternator retaining bolts.
  5. Remove the alternator from the vehicle.
To install:
  1. Position the alternator and install the retaining bolts. Tighten the retaining bolts to 15-21 ft. lbs. (21-29 Nm).
  2. Install the drive belt.
  3. Attach the alternator connectors.
  4. Connect the battery ground cable.

I really hope help you with this (remember rated this help) Good luck.

Oct 13, 2009 | 2000 Ford Expedition

1 Answer

Replacing alternating belt


A good repair manuel to get which has picture step by step, Hanyes auto repair manuel at any aut part store for 20 bucks is a great investment.
.0l Engines The 3.0L engines were equipped with either the Nippondenso or Bosch alternators.
1. Disconnect the negative battery cable.
2. Install a 1/2 in, breaker bar in the tensioner slot. Rotate counter-clock- wise to release belt tension and remove poly-V belt.
3. Remove the alternator mounting bolts (2)
4. Remove the wiring and remove alternator.
To Install:
5. Position the alternator onto the engine, then install the wiring.
6. Set the alternator against the mounting bracket and install the mounting bolts.
7. Rotate the tensioner counterclockwise and install poly-V belt.
8. Connect the negative battery cable. 3.3L and 3.8L Engines
The 3.3L and 3.8L engines were equipped with the Nippondenso alternators. 1. Disconnect the negative battery cable.
2. Remove the alternator drive belt, by relieving the tension on the dynamic tensioner
3. Loosen the nut on the support bracket at the exhaust manifold, do not remove it.
4. Remove the alternator tensioner/power steering bracket bolt.
5. Remove the tensioner stud nut and remove the tensioner.
6. Remove the alternator mounting bolts.
7. Remove the power steering reservoir from the mounting bracket, do not disconnect the hoses, and position it out of the way.
8. Remove the alternator support bracket bolts, Remove the intake plenum to alternator bracket bolt and remove the alternator support bracket from the engine.
9. Remove the alternator from the engine and disconnect the electrical leads.
To Install:
10. Install the alternator in position on the engine and connect the electrical leads.
11. Install the alternator support bracket, tighten the retaining bolts to 40 ft. lbs. (54 Nm). Install the power steering reservoir on the mounting bracket.
13. Install the alternator mounting bolts, tighten the bolts to 40 ft. lbs. (54 Nm).
14. Install the tensioner and tensioner mounting stud. Install the retaining nut on the exhaust manifold.
15. Install the alternator belt, insert a 1/2 in. extension into the square hole in the tensioner and turn the tensioner. Tighten the tensioner bolt.
16. Connect the negative battery cable.

Oct 09, 2009 | 1994 Dodge Caravan

2 Answers

Bad alternator


Disconnect the negative clamp on the battery. Remove the bolt on the adjustment arm (the one with the slot) of the alternator. Loosen the pivot bolt at the bottom of the Alt. Swing the alt inward to loosen the belt. Take the belt of the pulley. Take off the wires noting where they attach. Remove the pivot bolt. You should be able to take the alt off now. Reverse the sequence but when adjusting the belt tension pry the side of the alternator with a bar so the belt can only be deflected about three quarters of an inch. Tighten the adjustment bolt. Don't over tighten the belt. It'll prematurely wear your bearings. Don't under tighten. It'll squeal.

May 08, 2009 | Ford Explorer Cars & Trucks

1 Answer

NEED INSTRUCTIONS ON REPLACING ALTERNATOR ON F150 FORD LARIET 1986.


REMOVAL & INSTALLATION

See Figures 1 and 2


0900c1528004b8db.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 1: Rear terminal alternator


0900c1528004b8dc.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 2: Side terminal alternator
  1. Open the hood and disconnect the battery ground cable.
  2. Remove the adjusting arm bolt.
  3. Remove the alternator through-bolt. Remove the drive belt from the alternator pulley and lower the alternator.

Some engines are equipped with a ribbed, K-section belt and automatic tensioner. A special tool must be made to remove the tension from the tensioner arm. Loosen the idler pulley pivot and adjuster bolts before using the tool. See the accompanying illustration for tool details.
  1. Label all of the leads to the alternator so that you can install them correctly and disconnect the leads from the alternator.
  2. Remove the alternator from the vehicle.
  3. To install, reverse the above procedure. Torque the pivot bolt to 58 ft. lbs.; the adjusting bolt to 25 ft. lbs.; the wire terminal nuts to 60-90 inch lbs.

BELT TENSION ADJUSTMENT

The fan belt drives the alternator and water pump. If the belt is too loose, it will slip and the alternator will not be able to produce it rated current. Also, the water pump will not operate efficiently and the engine could overheat.
Check the tension of the belt by pushing your thumb down on the longest span of the belt, midway between the pulleys. Belt deflection should be approximately 1 / 2 inch; (13mm).To adjust the belt tension, proceed as follows:
  1. Loosen the alternator mounting bolt and the adjusting arm bolts.
  2. Apply pressure on the alternator front housing only, moving the alternator away from the engine to tighten the belt. Do not apply pressure to the rear of the cast aluminum housing of an alternator; damage to the housing could result.
  3. Tighten the alternator mounting bolt and the adjusting arm bolts when the correct tension is reached.

Apr 07, 2009 | 1986 Ford F150 SuperCab

1 Answer

Alternator


There are 2 bolts that hold the alternator in position. One bolt is near the top of the alternator, the other is near the bottom. The bottom bolt threads through the end of the ADJUSTMENT bolt (which is at a 90 degree angle to this mounting bolt, and faces threaded end w/ adjustment nut to alternator). Loosen 2 mounting bolts, adjust tension at adjustment nut (near alternator), tighten 2 mounting bolts (upper bolt 33 ft lbs, Lower mounting bolt 18 ft lbs). countrycurt0

Sep 09, 2008 | 1989 Honda Prelude

Not finding what you are looking for?
2001 Audi A4 Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14204 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...