Question about 2006 Hyundai Atos 1.1

Open Question

Central locking problem

My manual central locking does not want to unlock from the outside on the driver side. please help?

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
blueextc3221
  • 15935 Answers

SOURCE: central locking

Resolving this problem will require removing the door panel in question, and checking for voltage at the solenoid when the unlock button is pressed.
If there is 12V at the positive wire to the solenoid, but the door does not attempt to unlock, you must replace the solenoid.
Doors are not fused individually, so the fact the other doors are operating properly rules out fuses.
Remove the door panel, and check for voltage - if there is no voltage, the wiring is suspect. This would require more in-depth troubleshooting - checking wires for continuity to ground, and overall continuity.
Start with the door. Re-post your findings and I can help you additionally.

Thanks for using FixYa - Your FiXyA rating is appreciated!!

Posted on Jan 22, 2009

Ad
ghost4548
  • 776 Answers

SOURCE: Central locking is flatening the battery

Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle. Unfortunately, you'll find the system which controls the door locks is the ETACS Module (which also controls many other circuits which would become disabled if you pulled its fuse).
I've run into the problem you describe. Frequently it turned out to be a bad switch in the driver's door lock/unlock actuator.... Unless I diagnose the problem myself (or some other qualified technician does it), it could be something else entirely.

Posted on Jun 07, 2009

ghost45
  • 1280 Answers

SOURCE: 97 Hyundai Elantra driver side door failed to

The door LOCK/UNLOCK actuator is siezed. You'll need to replace it.

Posted on Oct 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Central locking problem


Change/repair the central locking motor inside the door.

Apr 01, 2014 | 2006 Hyundai Atos 1.1

1 Answer

12/6/2010 2003 bmw 325xi: Key does not manually lock/unlock driver door...but still works in ignition and trunk...central locking system still works to lock/unlock all doors(including driver) from...


If the key turns in the lock, but does nothing, then the linkage has become disconnected or broken. The key is mechanical to the lock and the lock has a electrical switch to operate the central locking unit. Could be a simple broken clip from the lock barrel. Hope this helps

Feb 27, 2017 | 2003 BMW 325

2 Answers

My door locks won't work. They aren't working with the remote or the switch in the car. I can manually push them down, but even using the key in the door only unlocks the driver side.


In drivers side is damaged the driving motor for central doors locking. When is not works other doors also do not work! Try to unlock the car from the passenger side and you will see that the door is open all outside the driver's door! So you know that there is a problem!

Jun 30, 2010 | 2005 Dodge Caravan

1 Answer

I have a problem with my central locking on my 2005 focus . the obc tells me my rear passeger door is open and the drivers door . so the car wont lock, the luggae compartment is ok . any help with this...


It's unlikely you can rectify this problem by playing around with the CL system so you will need to take it to the dealer or auto electrician to fix.
In any event you should be able to manually lock all passenger doors on the vehicle from inside the car and the drivers door from outside with the key.

Before you take the car to the auto shop to fix the CL system try this if you have not already.

1. Manually lock - then manually unlock - all doors (except the driver's door) from inside the car and make sure they are fully shut.

2. Then manually lock all doors a 2nd time except the driver's door.

3. Hit the lock button on your car key pad to activate the central locking system. This should lock the drivers door but with the fault it probably won't. Wait a few seconds then hit unlock on your key pad. Wait again and then hit lock once more. If it will not lock all doors you know what to do next.

Dec 01, 2009 | 2005 Ford Focus

1 Answer

Central Locking system in Infiniti I30 not working


hello it sounds like you have a loose block conector in side the o/s/f a post.

Aug 21, 2009 | 1998 Nissan Maxima

1 Answer

N REG VAUXHALL CORSA CENTRAL LOCKING NOT WORKING


central locking on my 93 corsa with standard key, not electronic type as used on later models, all doors are locked and refuse to open, ive checked fuse and thats ok, doors refuse to open from inside the vehicle and from outside, only the tailgate will open from the key, any ideas ,,, thanks dave

Apr 17, 2009 | Ford F Cars & Trucks

1 Answer

Jeep grand cherokee central locking system


If all the doors do not lock or unlock when using the passenger side switch, then the switch itself is probably bad.   If the passenger side switch locks or unlocks all the other doors except for its own, then the power lock solenoid inside the door is bad or jammed.  If it is jammed, try locking and unlocking the door manually while activating the switch to work its way free.

Dec 13, 2008 | 1996 Jeep Grand Cherokee

1 Answer

Faulty central locking


Get in passenger side and unlock drivers side manually, this will unlock the 4 doors.

Jun 24, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2006 Hyundai Atos 1.1 Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...