Question about 2001 Citroen Xsara

Open Question

Looking for torque settings

Loooking for torque settings

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HEAD BOLT TORQUE SPECS FOR MITSUBISHI TRITON 3.2 DIESEL 4M41U ENGINE - THANK YOU


there's no one torque setting. there's multiple stages and a sequence you have to do it in. usually finger tight, then tighten to a torque setting spiraling out. then torque it further so many degrees.
check the pajero 4m44 forum for exact specs. got manual at hm. have look later.

Jun 28, 2016 | Mitsubishi Cars & Trucks

1 Answer

4610 ford diesel tractor water pump bolt torque settings


First you need to know the diameter of the bolts and the type of thread ie 3/8 N/C or 5/16 N/F then look at the type of bolt ie plain steel or high tensile SAE grade 3, 4, or 6, once you know this go to a general purpose bolt torque chart, and derive the torque spec info.
If the water pump is cast iron use the full torque specification.
If the water pump is alloy then reduce the torque spec 10%

Below is an example of a general purpose bolt / nut torque chart

26186159-4xbrgr0a3wt3vp4m2wlhd0as-1-0.jpg

May 05, 2016 | Ford Cars & Trucks

1 Answer

Mazda b3 1300 torque settings


Not sure what torque spec's your looking for.
Go to www.AutoZone.com, enter your vehicle information and check specifications. You should be able to look up the torque spec's your looking for. Save 20 On Online Ship To Home Orders Of 100 Or More

May 18, 2015 | Mazda Cars & Trucks

1 Answer

Head torque settings of 1983 Nissan Langley 1.5


try this link , i'm not sure if the list goes that far back but worth a look, click on torque tables and look up your vehicle
http://www.speedwayautoparts.com/index35.htm

Oct 14, 2014 | Cars & Trucks

1 Answer

Torque setting for wheel nuts on Renault Alloy wheels


130(NM) 96 ft/lbs is the torque setting for a 2008 renault scenic so as not to ruin studs or brake rotors should be sufficient for allloys just need to check alloy lug nuts more often

Aug 09, 2014 | Renault SCENIC Cars & Trucks

1 Answer

Atos 1.1 torque settings


You can call a parts store, have them look up the part first for pricing, and ask if there are required torque setting for the area. Sometimes the owners manual will have some specs

Jul 10, 2013 | Hyundai Cars & Trucks

2 Answers

Engine torque settings mitsubishi 4d32


im looking for information by a 4d32 Mitsubishi , help!!!!!! thanks

Apr 03, 2012 | 1988 Mitsubishi Cargo

3 Answers

Hi I'm looking for cylinder head torque settings for a 1992 BMW 316/318 e36


BMW cylinder torque setting all models

According to my service manual as follows.

Cyl head to engine block (torx e12 M10 bolts)

Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees

Cyl head to lower timing chain cover 10nm (89in – lb)

The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.

Jun 16, 2008 | 1992 BMW 3 Series

Not finding what you are looking for?
2001 Citroen Xsara Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14363 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...