Question about Mitsubishi Cars & Trucks
Turn on the lights and only the driver side is on. Flick the high beams and driver side turns off and passenger comes on. Right side is only high beam. Left is only low beam. All fuses good. Replaced relay and same issue. Also replaced light stick on steering column.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Left low beam is dim
The mechanic didn't hook up the ground wire. The system is using the other light as it's ground and when this happens it causes the other light to go out.
Check the ground wires
Posted on Aug 24, 2008
If you have separate bulbs for the low and high beams(4 light system), if you pull the turn signal and hold it, all 4 lights will stay on until you release the turn signal. You need to replace the bright bulb on the right side and the low bulb on the left side. If your headlights only have one bulb on each side, then you will have to replace both of them to get everything to work.
Posted on Jan 04, 2011
on my 2006 dodge ram 3500 5,9l same problem with headlights and turn signal , the problem was with a fuse box , i replaced the fuse box everything work just fine.
Posted on Jan 22, 2013
Tips for a great answer:
Oct 23, 2015 | Saturn Cars & Trucks
Oct 25, 2014 | 2002 Mitsubishi Mirage
Jan 04, 2011 | 2000 Ford Mustang
Nov 23, 2010 | 2001 Chevrolet Cavalier
May 23, 2010 | 2004 Buick Regal
Feb 15, 2010 | 2002 Audi A4
May 09, 2009 | 1997 Ford Explorer AWD
Apr 17, 2009 | 1992 Volkswagen Fox
Oct 23, 2008 | 2001 Lincoln LS
256 people viewed this question
Usually answered in minutes!