Question about Cars & Trucks
Trying starting the car put in N wait a few seconds and then switch to two wheel drive.
Posted on Apr 02, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i believe those are vacuum controlled on top of the transfer case is a plug with 3-4 vacuum lines going to it,you will need to take it out and see if the check ball is stuck if it is it needs to be replaced
Posted on Nov 12, 2008
I assume that you have tried reversing the truck to get it out of 4WD. In case you haven't, turn the switch to 2WD then back up the truck about 20-30 feet. If it still won't come out of 4WD then you likely have a bad encoder motor (which selects all transfer case modes), or there is an internal problem with the transfer case. My opinion is the encoder motor is likely the trouble because usually (but not always) if there is an internal problem you would still be able to select a different mode.
Posted on Jan 24, 2011
Tips for a great answer:
Nov 19, 2015 | Chevrolet Blazer Cars & Trucks
Jul 02, 2013 | Cars & Trucks
Aug 01, 2012 | Cars & Trucks
Jan 14, 2010 | 2001 Chevrolet Blazer
16 people viewed this question
Usually answered in minutes!