Question about 2002 Ford Windstar Cargo
My 2002 windstar has heat only when the van is moving.no heat from the back heater
That could mean that your water pump impeller is broken. when you press the gas the remaining piece of the impeller is pushing the water and it actually makes it to the heater core. at idle it isn't spinning fast enough. ask a local autoparts store if the impeller is made of plastic.
Posted on Apr 02, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
My 99 windstar did this too. It was the blend door that the actuator motor goes into was broke. When you pull the actuator out look into the hole and see if you see a d shape piece coming out of the box if it is not d shape it is broke check out this site great photos
Posted on Feb 28, 2009
Blend air door may be stuck. I removed a pencil from a heater box before. It had fallen from the dash, down through the defrost vents and jamed the door.
Posted on Nov 13, 2009
ford courier workhorse ,great van ---right when engine is hot feel the hoses that run into the heater ,also it could be the heater core was leaking and someone has joined the hoses together .if the hoses are connected and they are hot then ,try removing them and then flushing the heater with a hose pipe
Posted on Nov 29, 2009
Testimonial: "not able to try solution yet, very wet outside. not sure how to flush the heater? thankyou anyway"
those two codes are for the o2 sensors. both are the upstream sensors on the front and rear banks. so they are desinagted bank 1 sensor 1 and bank 2 sensor 1. them most common cause for this is faulty o2sensors , bad gas and of a poor running engine. so if your car runs good (no misfire) and gas is ok then replace the o2sensor witch is the very most common cause.
Posted on Jan 28, 2010
Testimonial: " Help With Problem But Where Are These O2 Sensor"
Tips for a great answer:
Dec 19, 2016 | 2001 Ford Windstar
Sep 30, 2016 | 1998 Ford Windstar
Jan 27, 2014 | 2003 Ford Windstar
Feb 15, 2010 | 2002 Ford Windstar Cargo
Jan 06, 2010 | 2001 Ford Windstar
Nov 13, 2009 | 2001 Ford Windstar
Mar 28, 2009 | 2002 Ford Windstar Cargo
Mar 10, 2009 | 1997 Ford Windstar
Jan 12, 2009 | 2002 Ford Windstar Cargo
223 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: