Question about 1991 Toyota Pickup

1 Answer

Left turn signal works intermittently.

Right turn signal works, hazards work, but the left turn signal clicks super fast or not at all and only flashes the indicator on the dash when I go over a bump or turn my wheel. All bulbs function.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 18 Answers

Hello. You may have a faulty turn signal switch or an expensive relay module. A turn signal switch is way cheaper than a relay module.

Posted on Apr 02, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 186 Answers

SOURCE: 2001 Toyota Avalon - Rear signals

Check the front lights. Usually if i flashes fast it indicate a bulb is out on that side.

Posted on Aug 02, 2009

  • 5 Answers

SOURCE: Rear right turn signal does not work.

check the front right bulb

Posted on Sep 17, 2009

  • 3600 Answers

SOURCE: Left turn signals not working and left turn signal

one of the left turn signal bulbs is burned out. turn them on and look to see which one is out when you see one not on replace it and you are up and running again.

Posted on Sep 23, 2009

  • 691 Answers

SOURCE: turn signal on lights stays on but doesnt blink

Its under the dash board on the left side (driver side). It's not in the same fuse box will be near it. If you get a replacement flasher relay you can see what the new one look like, just look underneath the dash match the relay and replace it fairly simple and make sure all the bulbs are good.

Posted on Oct 03, 2009

  • 432 Answers

SOURCE: Hazard signal and horn do not work on my 91 Toyota Celica Gt.

Check the flasher & horn relay.Have no idea where they would be on your car.

Posted on Jan 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alpha Romeo 156 My Left hand indicator light stays on continually, does not flash. and when I turn the hazard light switch on both indicators continually glow.


Generally speaking, symptoms of a bad or failing turn signal bulb are usually the culprit...in your case, either it's the front left or rear bulb. Varies for different vehicle makes...common signs include:
  1. turn signal light staying on solid
  2. or blinking very fast
  3. or either sides of the bulbs stop blinking altogether.
To test this, make sure you reconnect everything you disconnected.
Turn the left signal light on; go to the front of the vehicle, is the turn signal bulb illuminated? If it lights up, even though it is not blinking obviously the bulb is okay. If it doesn't, replace it- problem solved. You'll do the same procedure for the rear turn signal Is that lit up? If not replace the bulb and the problem is solved.
Another common failure is when the turn signal blinks really fast, same procedure as mentioned above.
If both bulbs for the left side and right side illuminate but don't blink, the problem is in the steering column turn signal switch.
If the left or right side blinkers don't work properly at all...then check the integrated hazard warning/turn signal flasher relay- that may be defective; again, that's usually the case if both sides of the signal light don't work.
If you are blowing any fuses related to the flasher system, you have an electrical overload in the turn signal circuitry.

Feb 12, 2017 | Cars & Trucks

2 Answers

Brake light on driver side isn't working tried changing fuse and bulb and still no luck ?


Sometimes the housing the bulb is in has gone bad try cleaning out the prongs where the bulb goes in it that does not work replace the fixture the bulb goes in had the some thing happen to my trailblazer hope this helps

Jul 31, 2015 | 2006 Chevrolet Chevrolet Cobalt LS

1 Answer

1994 3500hd front left turn signal won't work


The wire feeding the front left turn signal is likely crimped or stretched and touching the body somewhere. Do you best to trace the left front turnsignal wire back as far as you can - even just jiggling it might give you short term solution (although it will probably come back).
The fast flash of the rear light is because the short up front is letting too much electricity run through the flasher module. This makes it run too fast. Find the short up front, and both problems will be solved.

Apr 22, 2014 | 1994 Chevrolet C/K 3500

2 Answers

Turn signals and Hazard no longer work


Fast clicking is caused by a higher than normal current being applied. Normally a short or a aftermarket relay that requires less current to switch. Sounds like the entire multifunction switch is bad.

Mar 20, 2014 | 2000 Dodge Stratus

1 Answer

Cadillac srx 2007


sounds like a fuse is blown. check your fuses

Aug 02, 2013 | Cars & Trucks

1 Answer

On my 2004 impala, the front right turn signal doesn't work, (only works with hazard lights). And the back right signal is fast. The signal "clicking" sound is non stop but on the other hand...


If the turn signal filament of the right front park/turn lamp is known to be OK and the hazard switch is in the normal position, the hazard switch or the turn signal/multi-function switch could be defective

Oct 16, 2012 | Cars & Trucks

1 Answer

After i hit someone from the back my left turn signals stopped working but the right side does work. Also the hazard signals on the left side do not work but the right does work. what should i do?


The wiring for your left turn/hazard might be damaged. The turn and hazard signals use the same bulbs and wiring, but get their signal from different switches.

Aug 08, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

Where is the exact location of the hazard light flasher for a 1989 GMC Sierra C2500, and what is the possibility that it is the true problem behind the hazards not working? Beyond my hazards not working my...


Are you sure the right side bulbs all flash? You say you replaced all the bulbs? Why would you replace bulbs that were working? Did you have this problem before you replaced the bulbs, or after. The hazard flasher is down under the dash, left side, turn the signals on and follow the clicking noise.The hazard flasher and the turn signal flasher should be near each other, and are interchangeable. If it clicks fast, a bulb or a bad socket is usually the cause. These trucks have a lot of problems with the tail light circuit boards.

Nov 04, 2009 | 1989 GMC C2500

2 Answers

99 Chevy Tahoe... Rear turn signals, brake lights, and hazards


I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Oct 10, 2009 | 1999 Chevrolet Tahoe

Not finding what you are looking for?
1991 Toyota Pickup Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...