Question about Pontiac Grand Prix

Open Question

How to determine if motor mounts are bad2002 grandprix

Location of lower motor mount this is a 3800 series v-6 2002 model year

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

kyo0141
  • 15 Answers

SOURCE: location of motor mounts on 2004 chevrolet cavaliar

the other mount is behind the motor on the right hand side by the transmission and there is another one right next to the lower control arm on the passenger and another one by your belt side i can post you some photos on were they are if you would like

Posted on Dec 29, 2008

aaangie220
  • 202 Answers

SOURCE: Motor Mount location

there are three moounts. two for the engine and one for the trans. there is one on the passenger side on the top to the left of the motor there is one on the bottom by the oil pan and one by the trans.

Posted on Feb 09, 2009

shawnsz
  • 64 Answers

SOURCE: can not get the serpentine belt around the motor mount

on some of the 3.8 you do have to remove the motor mount,there is no way around it. It is not as bad as it sounds.

Posted on Feb 20, 2009

mcgyver468
  • 710 Answers

SOURCE: how does the drive belt

YES ON THIS (3.8 LITER?) YOU MUST REMOVE THE MOTOR MOUNT TO REMOVE THE SERPENTINE BELT. NOT THE BEST DESIGN THAT I'VE SEEN. HOPE THIS HELPS. GOOD LUCK

Posted on May 01, 2009

motor1258
  • 6674 Answers

SOURCE: i have broken motor mount in my 1999 ford taurus.

Here's a link that may help you.

http://www.ford-forums.com/ford-taurus/24601-taurus-sable-transmission-removal-should-help-4.html

Posted on Aug 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change motor mounts on 1998 ford escort 4 door sedan


The exact location varies depending on model, engine size, power and suchlike.

Most models have three mountings and there are no lower ones, though there could be a steady bar or torque reaction mount attached to the bottom of the transmission.

The power unit tends to be mounted with one mount high up on the extreme right and two on the transmission end, one at the back and one at the front.

Jul 18, 2016 | 1998 Ford Escort

1 Answer

Lower alternator mount broke,not on alt casing but on motor,is this mount also a motor mount?its aluminum.


Some cars yes, It can be a separate mount. some not. Year ake and model helps...

Mar 16, 2016 | Cars & Trucks

1 Answer

How to install a motor mount on a chevrolet 2000 impala 3800 series 2 v6


You have more than one engine and transmision mounts on your vehicle
upper mounts easy to install but bottom two is little hard because hard access to bolts good idea to work with lift and make sure your engine secured on level before losen any bolt from mounts !!! If you dont have proper tools good idea to let some one do it for you be safe!

Feb 09, 2012 | 2000 Chevrolet Impala

1 Answer

Motor mount bracket attached to engine looks like a spacer broke and cant find a name or replacement


The motor mount really has no specific name other than motor mount. Its the location of the mount that determines the part that you need. Just call and parts store and tell them the location of the mount and they will usually be able to match something up for you.

Sep 12, 2010 | Chevrolet Malibu Cars & Trucks

1 Answer

Im going to have to change my serpentine belt on a 96 buick park avenue. 3800 non supercharged. Looked at it yesterday and it looks like I have to unbolt motor mount to get the belt off? Is there an easier...


yes.that is the only way.You have to unbolt the motor mount. To replace the serpentine belt on a V6 3800 series non-supercharged motor, you must jack up the motor and remove a motor mount. Before going any further make sure that the factory belt diagram sticker is still somewhere under the hood; if not, make a detailed diagram of the path of the belt. You must then use a breaker bar with a socket (I believe 13/64") and pull it toward the front of the car to release the belt tensioner. Put the new belt on, tighten it, put the mount back on, and lower the jack. Thanks. keep updated for any more query.you can rate this solution and show your appreciation.

Aug 02, 2010 | Buick Park Avenue Cars & Trucks

1 Answer

I having trouble finding the crank position sensor on my mitsubishi galant.


You did not specify year or engine size, but...

The crank position sensor is located inside the timing cover, behind the crank pulley.

The wiring for it extends out of the timing cover by the motor mount upwards to a three wire triangular connector. On four cylinders the connector is mounted by the front corner of the head. V6 models the connector is mounted in the valley between the heads.

Later 4cyl models integrate the connector into the lower cover, but the sensor location is still the same.

Aug 11, 2009 | 2001 Mitsubishi Galant

1 Answer

Mount for a 91 saturn sl2 (dohc)


The real problem you have is that Saturn changed the motor mounts after the first year. So the 91 mounts are different than those for the 92-99 1.9L 4 cylinder which are all the same. You can wait around for them to appear on ebay, except for the front mount which has a small shock built into it which I have never seen for sale on ebay. I assume a dealer could get them for you at a ridiculous price, or check SaturnParts.net for a somewhat lower but still high price.

Note that most of the folks selling Saturn motor mounts just assume that 91-99 years are the same as the engine was the same but that is just not true. If you look on ebay you can find Saturn parts identifier sheets, S-series, for about a dollar plus 3 dollars shipping, buy one of those those and you will see the difference between the engine mounts and have the exact part numbers.

May 29, 2009 | 1991 Saturn SL1

1 Answer

Can not get the serpentine belt around the motor mount


You need to remove the mount, no other way to get the belt on, Labor time is over 1 hour for someone that has done them before.

Jan 24, 2009 | 1996 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...