Question about 2006 Toyota Sienna
I need to know how to reset the maintenance light
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I get many calls a week for this procedure...
This is really easy! Follow these directions:
Turn the key ON
Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.
Turn the key OFF.
Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.
Turn the key ON, do not start the engine
Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.
Release the black trip meter reset stick.
This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.
Hope this helps!
Posted on Feb 06, 2009
OK ON YOUR SPEEDOMETER, THERES TRIP A, TRIP B, AND THE REGULAR ODMO... U NEED TO PUT IT ON TRIP A (WITH THE KEY OFF) ONCE U GET IN ON TRIP A, PUSH AND HOLD THE BUTTON DOWN,WHILE HOLDING BUTTON DOWN TURN KEY ON, YOU WILL SEE LINES POP UP ON THE ODOMETER, (WHERE THE MILES ARE DISPLAYED) THEY WILL GO OUT ONE BY ONE, ONCE IT STATES 0 YOU ARE GOOD TO GO.. GOOD LUCK AND THANK YOU FOR USE FIXYA.COM..KEITH..
Posted on Mar 14, 2009
Revised procedure (for Highlander)
Turn ignition key to 'ON' and press the odometer button until the display reads actual mileage... not Trip A or B.
Turn ignition key to OFF.
Hold in the same button you used in step 1.
While holding the button in, turn ignition key to 'ON'.
The 'Maint Reqd' light should blink and go out.
Posted on Jul 02, 2009
If you had the 90,000 mile service done, and was performed to the service maintenance guide, not much is needed at 100K mils; oil change and tire rottion; replace the air filter.
Posted on Jul 16, 2009
Tips for a great answer:
Mar 15, 2013 | 2009 Toyota Sienna
Mar 22, 2010 | 2008 Toyota Camry
Mar 01, 2010 | 2008 Toyota Sienna
Feb 05, 2010 | 2004 Toyota Sienna
Dec 12, 2009 | 2000 Toyota Sienna
Nov 18, 2009 | 2006 Toyota Sienna
Aug 07, 2009 | 2008 Toyota Sienna
Jul 29, 2009 | 2006 Toyota Sienna
May 09, 2009 | Toyota Sienna Cars & Trucks
Feb 06, 2009 | 2006 Toyota Sienna
Oct 06, 2015 | 2006 Toyota Sienna
19 people viewed this question
Usually answered in minutes!