Question about 2013 Hyundai Santa Fe
I had an accident with some scratches on the rear bumper of my 2013 Santa Fe. So, I brought the SUV to a repair shop who claimed that they changed the bumper. I later found out that the shop only patched up the bumper with a layer of glue and it was could be easiely removed by WD-40. When the bu8mper was removed, I saw the manufacture date of the bumper was July 2012. Is this the original bumper of my SUV? How could I confirm this?
Have your insurance company come to where your car is
& look it over & compare the repair to the work that the insurance
company wanted done.
Ask a lawyer how to proceed, would be next
I would guess the body shop cut corners or you didn't go to
the top two shops they recommend going to
Posted on Apr 01, 2014
Bumpers are in almost every case exchanged for a repaired one or if the damage is not to severely damaged it is repaired at the body shop. This keeps insurance rates down and the guarantee is the same.
Posted on Apr 01, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.
Posted on Apr 17, 2009
SOURCE: How to remove rear brake rotors
THE REAR BRAKE ROTOR IS A LOOSE ROTOR AND SHOULD COME OFF EASILY. IF NOT, IT IS POSSIBLE THAT THE ROTOR IS HELD BY RUST ONTO THE HUB OR THE BRAKE SHOES IS STILL EMBEDDED INTO THE ROTOR. REMOVE THE HANDBRAKE CABLE TO ENSURE THAT THE BRAKESHOES COLLAPSE AND TRY TO LOSEN IT AGAIN. IF SEASED ONTO THE HUB BY RUST, KNOCK THE ROTOR WITH A COPPER HAMMER TO BRAKE THE RUST WITH A RUST REMOVER.
Posted on Jul 15, 2009
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
Posted on Oct 05, 2009
Use exactly what weight is listed in your owner's manual or on the oil fill cap. More than likely you will find it requires 5w20 weight. I personally use Pennzoil and have for over 30 years with not one internal engine problem. But any major brand will be good. Also very important is the filter. Use a quality filter such as Purolator, Wix, or Bosch and avoid cheap filters. I personally use Purolator Pure One filters. Change your oil and filter every 5,000 miles and your engine will give you great service. Also change the Air Filter every 30,000 miles as it is very important to keep it clean. Change your fuel filter, if changeable, every 50,000 miles. Some vehicles have permanent fuel filters.
Posted on May 16, 2010
Tips for a great answer:
Mar 17, 2017 | Cars & Trucks
Feb 21, 2015 | 2013 Hyundai Santa Fe
Aug 24, 2014 | 2013 Hyundai Santa Fe
Feb 25, 2018 | 2003 Hyundai Santa Fe
Jun 06, 2017 | Hyundai Santa Fe Cars & Trucks
Jun 21, 2017 | 2002 Hyundai Santa Fe
Dec 03, 2010 | 2005 Hyundai Santa Fe
Jan 18, 2010 | 2003 Hyundai Santa Fe
Jan 12, 2017 | 2013 Hyundai Santa Fe
150 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: